IF there IS a shorting plug inserted, there are a set of switch contacts
and a bit of wiring that could give the same results, Yet another
possibility is that the center contact of the chassis mount jack is
spread out where it's not making contact. Last but not least, is your
"shorting plug" REALLY shorted?? :-)
73, Garey - K4OAH
Glen Allen, VA
Drake 2-B, 4-B, C-Line& TR-4/C Service Supplement CDs
<www.k4oah.com>
Jim Shorney wrote:
On Mon, 7 Dec 2009 16:53:09 -0800 (PST), Brett Forehand wrote:
Hello everyone! Received my cap kit from Hayseed Hamfest (my tech sends his compliments on the
completeness of the kit). Caps are installed, but still having problems with the receiver going to
a 20+ signal on the S meter when switched to "ext. mute" and "nb". He said
even w/disconnecting the noise blanker board, it still puts a 20+ signal on the S meter in either
of these positions. Any suggestions as to what the problem might be?
Is there a shorting plug in the EXT MUTE jack on the back? ISTR this as normal
behavior with no shorting plug or T-4any present.
_______________________________________________
Drakelist mailing list
[email protected]
http://mailman.zerobeat.net/mailman/listinfo/drakelist
