Thanks, Garey, for reply.. I've got an old Galaxy 2000 power supply torn apart and wanted to replace both caps and diodes but couldn't find any cross-references on those rectifiers.
I had some diodes used in the L4B but it looks like they won't handle the Galaxy load.. I don't know if you're familiar with the Galaxy 2000 design but it's a comparatively small 2 kw linear running 10 paralell 6HF5's in a grounded cathode design with peak plate currents around 2.5 amps.. big bang in a small package! By the way, I just finished a recap of that L4B and posted it on the Halo.net site at this link .. http://mysite.verizon.net/halo.net/halo05c.html Any idea where I might be able to pick up a few feet of the high voltage wire used in the L4B? Thanks again, Doc ================= Doc - Both those diodes cross to an NTE156, which is a 1000 PIV @ 2A rectifier. IF your device actually NEEDS 2A, then a 1N5408 (3A) would be an inexpensive replacement. If you actually need less than 1A, a 1N4007 is even cheaper and easier to find. What are they used in? Drake? For future reference ... <http://nte01.nteinc.com/nte/NTExRefSemiProd.nsf/$$Search?OpenForm> 73, Garey - K4OAH Glen Allen, VA Drake 2-B, 4-B, C-Line& TR-4/C Service Supplement CDs <www.k4oah.com> HaloNet wrote: > This'll take you back a piece.. I've been looking, without success, for a > cross reference on a couple of vintage diodes from an old power supply.. > would appreciate a reply from anyone who might give me a cross reference or > ratings specs on: > > MR1033B& MR1034B > > Thanks a bunch > > Doc > > _______________________________________________ Drakelist mailing list [email protected] http://mailman.zerobeat.net/mailman/listinfo/drakelist _______________________________________________ Drakelist mailing list [email protected] http://mailman.zerobeat.net/mailman/listinfo/drakelist
