Thanks to all who responded that the coax connection I asked about is a plug-in connection and not soldered. Anyway, after re-seating the pins under the board and the connectors on top of the board the digital display still did not work and I do not have any test equipment. The easiest thing to do was check all 5 of the top of the board connectors again and I found that P3 was apparently still not making good contact with the pins. DeoxIT was applied and the digital display suddenly re-appeared. Low tech miracle.
Thanks again to all, Ken - N0VA
_______________________________________________ Drakelist mailing list [email protected] http://mailman.zerobeat.net/mailman/listinfo/drakelist
