Doc When restoring my L4B and rebuilding the PS I took the opportunity to rebuild the cable as well - it gave me a chance to take the stiff HV line out and replace it with a separate HV cable (automotive high tension line works well) and new matching connector on the PS (right next to the new PS board)...
I then recovered the PS cable with a length of large shrink tubing, shrank it and covered that with some woven black expandable poly cable covering which works very well and looks very cool. The whole thing is smaller, more flexible and doesn't have the HV line poking out before the connector. Good luck Michael W7HUT On Feb 22, 2010, at 2:06 PM, Garey Barrell wrote: > Doc - > > Belden has a nice cable, 27341A that looks like it would work. Only catch is > it comes in a 5000 foot reel.!! > > Twelve (12) #16 AWG conductors, 600V RMS insulation, multi-color coded with a > silver-gray overall sheath, 0.5" dia. > > Let's see, 5000', 10' each, only 500 participants. Unless we can find a > partial reel somewhere or some place that will cut to length. > > 73, Garey - K4OAH > Glen Allen, VA > > Drake 2-B, 4-B, C-Line& TR-4/C Service Supplement CDs > <www.k4oah.com> > > > HaloNet wrote: >> Thanks, Gents, for the suggestions on finding a source for power supply >> cable replacement.. looks like i'm not the only one who's been searching for >> same. It appears that I'll just make up a bundle and run it through a >> sheath of some sort.. roll my own. >> >> As always, appreciate the helpful comments.... >> >> Doc >> >> > > _______________________________________________ > Drakelist mailing list > [email protected] > http://mailman.zerobeat.net/mailman/listinfo/drakelist _______________________________________________ Drakelist mailing list [email protected] http://mailman.zerobeat.net/mailman/listinfo/drakelist
