All

Thanks for all the help with the 'smoked' transformer.  I DID find a 
replacement and have it installed.  I am still having power issues.

Fuse blows on power up.  I isolated it to the 250VCT side.  When I connect the 
RED wires, the fuse blows.  I removed all wires from the R-4C PS board and was 
planning to re-connect 1 at a time to isolate the 'short'.  I suspect I will be 
going through alot of fuses to figure out which wire is the actual culpret.  
Other than isolatin like this - any typical culprits or suggestions?

The hold up is that I nicked the EP487 in the process with the soldering iron.  
Its probably OK - but I would like to fix it.  I have a LM7812 (L7812CV) in my 
hand and can do the power supply mod - but I would rather find a suitable 
replacement transistor to get the radio to factory spec prior to the mod.  What 
will replace a EP487?  Is there anything special about this chip?

As far as progress, I have replace the electrolytics in the PS board and the 
muti-sections on the chasis with individual cans (isolated from the original 
and underneath the chasis)

As always, any help is appreciated.

Thanks and 73 - Jon K4WIT
_______________________________________________
Drakelist mailing list
[email protected]
http://mailman.zerobeat.net/mailman/listinfo/drakelist

Reply via email to