Hi Gang,
This is my first attempt at the list, so please bear with me.
I have a UV-3 that won't lock in on the 220 band. 144, and 440 work
fine. I was able to test the divider, and phase detector boards by
substitution, they both work well in another UV-3. The crux of the situation is
that I
had to repair both boards due to a short circuit (put the smoke back in) I
have a copy of a service manual that is poor at best. The right hand two
inches of the divider board schematic is missing. Can anyone either come up
with the schematic, or let me know what pins the band selection signal
leaves the divider board, and where it goes.
Thanks for reading
this Tom
_______________________________________________
Drakelist mailing list
[email protected]
http://mailman.zerobeat.net/mailman/listinfo/drakelist
