Chuck -
I'm not sure what you are referring to, but R91 IS a 150 ohm, 2W
resistor on Board 5.
The resistor across the bottom of the can is R136, and is a 1k, 1/2W.
??
Check my CD.......
73, Garey - K4OAH
Glen Allen, VA
Drake 2-B, 4-B, C-Line& TR-4/C Service Supplement CDs
<www.k4oah.com>
Chuck Grandgent wrote:
I'm doing the HayseedHamfest recapping on my R4B.
What's the deal with R91, it goes between the two 100uF sections.
What's it's purpose ?
And, It's listed as 150 ohms, 2 Watts. But in mine, it looks like
it's more like 1/2 watt, and looks pretty toasted, but it does test
OK.
I will also say, replacing that can is like doing a root canal on the R4B.
Got it all done today, but haven't tested it yet, will do that tomorrow.
Chuck, K1OM
_______________________________________________
Drakelist mailing list
[email protected]
http://mailman.zerobeat.net/mailman/listinfo/drakelist
