I prefer a "lower than normal" pitch/freq when digging out a CW signal out
of the noise or adjacent CW signals.
I am using a Timewave DSP-599ZX. The tone that I "prefer" is centered at
480 Hz or so. Also, the 250 Hz I.F. crystal filter I have works best at
480Hz signal tone.
Question, how do I adjust the sidetone of the T-4XC so it will fall into
bandpass of the Timewave filter centered at 480Hz. Currently the side tone
is at 600 Hz +/-, so when I transmit with the Timewave in line (set at
480Hz), I cannot hear the side tone or my keying.
Also is there an adjustment to assure that when I am using the R-4C as the
master oscillator (i.e. transceiver mode with R-4C as the controlling
oscillator) I am infact transmitting on the same frequency that I am
listening to (again I tune so I hear a 480Hz CW signal using the R-4C)?
Thanks in advance
Jim
WA9ZBV
_______________________________________________
Drakelist mailing list
[email protected]
http://mailman.zerobeat.net/mailman/listinfo/drakelist
