Hi guys... I'm needing some technical advice about some odd voltage readings with my ailing T4XB. I ran voltage checks tonight and compared them with the chart in the manual. All read normal except these: V5 – 6JB6 – Pins 3 and 9 both read: 140V (manual says should read: .3V and .9V respectively) V6 – 6JB6 – Pins 3 and 9 both read: 140V (manual says should read: .3V and .9V respectively) V3 – 6AU6 – Pin 7 reads: 140V (manual says it should read: 2.35V) Voltages were taken with the function switch in Tune (gain fully counter clockwise) Made no difference switch function switch to SSB. Those voltages seem really out of wack... got any ideas? Thanks, Joe
_______________________________________________ Drakelist mailing list [email protected] http://mailman.zerobeat.net/mailman/listinfo/drakelist
