Joe -
If you check the schematic, you'll see that the resistor is a Test Point
for adjusting the BAND oscillator per section 5-10 of the manual.
So yes, it goes 'no where'! :-)
73, Garey - K4OAH
Glen Allen, VA
Drake 2-B, 4-B, C-Line& TR-4/C Service Supplement CDs
<www.k4oah.com>
joe loverti wrote:
Hello Drake List Members,
I was doing some visual inspection of the bottom chassis of my TR-4C
tonight and noticed an anomaly that I was hoping to get some guidance on.
On pin 9 of tube V1 there is a 1meg resistor sticking up through a
hole in the chassis (near the PNB-34 blanker circuit) that isn't
connected to anything. The blanker IS installed on this radio. Does
this resistor need to be connected to something or does this seems
normal "as is"?
Thanks in advance for your continued assistance!
-Joe
WS8X
_______________________________________________
Drakelist mailing list
[email protected]
http://mailman.zerobeat.net/mailman/listinfo/drakelist
