The plate meter will only kick to 100-150ma on voice peaks when set
properly. Adjust the mic gain so that is what you have..depending on
the mic you use, 12 oClock might be fine. Don't try to get it to peak
up to the loaded value. the dynamics of the meter movement prevent it
from responding fast enough to show the actual peak current. A scope
can be a valuable tool to monitor for a while untile you are used to
what the "Normal" meter response looks like.
Curt
KU8L
Richard Palmer wrote:
Per the manual my Xmtr gain setting is at about 8-8:30. But I have no
meter movement when I transmit SSB. If I increase the setting to 12:00
I get deflection while transmitting.
So How should I set my Xmtr gain control?
Thanks,
KB8NXO
Toledo,Ohio
------------------------------------------------------------------------
_______________________________________________
Drakelist mailing list
[email protected]
http://mailman.zerobeat.net/mailman/listinfo/drakelist
_______________________________________________
Drakelist mailing list
[email protected]
http://mailman.zerobeat.net/mailman/listinfo/drakelist
