I have some of the BB's if anyone needs some. Terry - W8NJR In a message dated 10/31/2011 12:26:06 P.M. Eastern Daylight Time, [email protected] writes:
There should be ten bearings, 1/8" diameter steel, plus one more at the back end of the lead screw. If you can't get all ten in, loosen the adjuster screw at the rear of the lead screw. -- 73, Garey - K4OAH St Charles, IL Drake 2-B, 2-C/2-NT, 4-A, 4-B, C-Line and TR-4/C Service Supplement CDs <www.k4oah.com> Ron Ries wrote: > Steve, I read that you rebuilt the ball bearing on the PTO shaft on the R-4B that you recently acquired. I am in the process of restoring one also that I bought from Bob and noticed that there appears to be one less ball in the race than the race will accommodate. Is this what you found also? Otherwise, someone rebuilt the bearing and apparently 'dropped a ball!' > > Thanks! > > Ron > > > _______________________________________________ Drakelist mailing list [email protected] http://mailman.zerobeat.net/mailman/listinfo/drakelist
_______________________________________________ Drakelist mailing list [email protected] http://mailman.zerobeat.net/mailman/listinfo/drakelist
