Roger, I use an MC-50 w/ my TR-4 and it sounds fine. The only issue you may have is wiring the thing to work the Drake. I took an old 4 pin connector from a cb and made an adapter that puts the ptt and mic lines in the correct arrangement. The MC-50 I have uses 4 wires, 2 for mic and 2 for ptt. You have to tie a common ground to adapt to the Drake 3 wire as I recall.
Dave,.WV9E ----- Original Message ----- From: Roger Roger To: [email protected] Sent: Sunday, June 17, 2012 10:53 AM Subject: [Drakelist] mc-50 mic on t-4xc Hello the only mike I have is a kenwood mc-50> It has dual ratings hi-z 50 k ohm plus or minus 30%( @1000hz) or lo-z 600 ohm plus minus 30% (@1000hz). I have a drake t-4xc that I would like to test- use and I was wondering if this would be a decent match? and I'm thinking I would hook it up hi-z correct? Thanks in advance. I know there are better mics for this application but at the moment I don't have one! So any advice would be appreciated. Roger KF5NDJ [email protected] ------------------------------------------------------------------------------ _______________________________________________ Drakelist mailing list [email protected] http://mailman.zerobeat.net/mailman/listinfo/drakelist
_______________________________________________ Drakelist mailing list [email protected] http://mailman.zerobeat.net/mailman/listinfo/drakelist
