----- Original Message -----
From: "Dave, WV9E" <[email protected]>
To: "Roger Roger" <[email protected]>;
<[email protected]>
Sent: Sunday, June 17, 2012 1:29 PM
Subject: Re: [Drakelist] mc-50 mic on t-4xc
Roger,
I use an MC-50 w/ my TR-4 and it sounds fine. The only
issue you may have is wiring the thing to work the Drake. I
took an old 4 pin connector from a cb and made an adapter
that puts the ptt and mic lines in the correct arrangement.
The MC-50 I have uses 4 wires, 2 for mic and 2 for ptt. You
have to tie a common ground to adapt to the Drake 3 wire as
I recall.
Dave,.WV9E
There is a data sheet for this mic showing the wiring
at:
http://homepage.ntlworld.com/rg4wpw/mc50.pdf
--
Richard Knoppow
Los Angeles
WB6KBL
[email protected]
_______________________________________________
Drakelist mailing list
[email protected]
http://mailman.zerobeat.net/mailman/listinfo/drakelist
