On 10.03.2017 05:32, Sean Paul wrote:
> From: Lin Huang <h...@rock-chips.com>
>
> We need to enable video before analogix_dp_is_video_stream_on(), so
> we can get the right video stream status.
>
> Cc: 征增 王 <w...@rock-chips.com>
> Cc: Stéphane Marchesin <marc...@chromium.org>
> Signed-off-by: Lin Huang <h...@rock-chips.com>
> Signed-off-by: Sean Paul <seanp...@chromium.org>

Reviewed-by: Andrzej Hajda <a.ha...@samsung.com>

Patch contains also changes not connected with subject, maybe in next
spin it would be good to comment it in description.
--
Regards
Andrzej

> ---
>  drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 11 +++++------
>  1 file changed, 5 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c 
> b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
> index 9dfa1b507389..52218d743059 100644
> --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
> +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
> @@ -823,11 +823,10 @@ static int analogix_dp_config_video(struct 
> analogix_dp_device *dp)
>               if (analogix_dp_is_slave_video_stream_clock_on(dp) == 0)
>                       break;
>               if (timeout_loop > DP_TIMEOUT_LOOP_COUNT) {
> -                     dev_err(dp->dev, "Timeout of video streamclk ok\n");
> +                     dev_err(dp->dev, "Timeout of slave video streamclk 
> ok\n");
>                       return -ETIMEDOUT;
>               }
> -
> -             usleep_range(1, 2);
> +             usleep_range(1000, 1001);
>       }
>  
>       /* Set to use the register calculated M/N video */
> @@ -842,6 +841,9 @@ static int analogix_dp_config_video(struct 
> analogix_dp_device *dp)
>       /* Configure video slave mode */
>       analogix_dp_enable_video_master(dp, 0);
>  
> +     /* Enable video */
> +     analogix_dp_start_video(dp);
> +
>       timeout_loop = 0;
>  
>       for (;;) {
> @@ -955,9 +957,6 @@ static void analogix_dp_commit(struct analogix_dp_device 
> *dp)
>                       DRM_ERROR("failed to enable the panel\n");
>       }
>  
> -     /* Enable video */
> -     analogix_dp_start_video(dp);
> -
>       dp->psr_enable = analogix_dp_detect_sink_psr(dp);
>       if (dp->psr_enable)
>               analogix_dp_enable_sink_psr(dp);


_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Reply via email to