On 10.03.2017 05:32, Sean Paul wrote:
> From: zain wang <w...@rock-chips.com>
>
> The STRM_VALID bit in register ANALOGIX_DP_SYS_CTL_3 may be unstable,
> so we may hit the error log "Timeout of video streamclk ok" since
> checked this unstable bit.
> In fact, we can go continue and the streamclk is ok if we wait enough time,
> it does no effect on display.
> Let's change this error to warn.

Description does not describe the change from warn to err in case of
slave video clk.
Beside this:
Reviewed-by: Andrzej Hajda <a.ha...@samsung.com>
--
Regards
Andrzej

>
> Cc: Douglas Anderson <diand...@chromium.org>
> Signed-off-by: zain wang <w...@rock-chips.com>
> Signed-off-by: Sean Paul <seanp...@chromium.org>
> ---
>  drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 10 +++++-----
>  1 file changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c 
> b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
> index 35ea04ff4078..4ebbf3053639 100644
> --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
> +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
> @@ -886,9 +886,8 @@ static int analogix_dp_config_video(struct 
> analogix_dp_device *dp)
>               if (analogix_dp_is_slave_video_stream_clock_on(dp) == 0)
>                       break;
>               if (timeout_loop > DP_TIMEOUT_LOOP_COUNT) {
> -                     dev_warn(dp->dev,
> -                              "Ignoring timeout of slave video streamclk 
> ok\n");
> -                     break;
> +                     dev_err(dp->dev, "Timeout of slave video streamclk 
> ok\n");
> +                     return -ETIMEDOUT;
>               }
>               usleep_range(1000, 1001);
>       }
> @@ -920,8 +919,9 @@ static int analogix_dp_config_video(struct 
> analogix_dp_device *dp)
>                       done_count = 0;
>               }
>               if (timeout_loop > DP_TIMEOUT_LOOP_COUNT) {
> -                     dev_err(dp->dev, "Timeout of video streamclk ok\n");
> -                     return -ETIMEDOUT;
> +                     dev_warn(dp->dev,
> +                              "Ignoring timeout of video streamclk ok\n");
> +                     break;
>               }
>  
>               usleep_range(1000, 1001);


_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Reply via email to