omapdrm does not pass the rotation angle to dispc. We need to pass the
rotation angle to fully support TILER rotation with YUV formats.
Signed-off-by: Tomi Valkeinen <tomi.valkei...@ti.com>
---
drivers/gpu/drm/omapdrm/omap_fb.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/drivers/gpu/drm/omapdrm/omap_fb.c
b/drivers/gpu/drm/omapdrm/omap_fb.c
index 2dca19a0c2ff..4e434b2097ec 100644
--- a/drivers/gpu/drm/omapdrm/omap_fb.c
+++ b/drivers/gpu/drm/omapdrm/omap_fb.c
@@ -167,6 +167,8 @@ void omap_framebuffer_update_scanout(struct drm_framebuffer
*fb,
uint32_t w = win->src_w;
uint32_t h = win->src_h;
+ /* note: DRM rotates counter-clockwise, TILER + DSS rotates
clockwise */
+
switch (win->rotation & DRM_ROTATE_MASK) {
default:
dev_err(fb->dev->dev, "invalid rotation: %02x",
@@ -201,6 +203,15 @@ void omap_framebuffer_update_scanout(struct
drm_framebuffer *fb,
if (orient & MASK_X_INVERT)
x += w - 1;
+ if (!(orient & MASK_XY_FLIP) && !(orient & MASK_Y_INVERT))
+ info->rotation = OMAP_DSS_ROT_0;
+ else if (!(orient & MASK_XY_FLIP) && (orient & MASK_Y_INVERT))
+ info->rotation = OMAP_DSS_ROT_180;
+ else if ((orient & MASK_XY_FLIP) && (orient & MASK_Y_INVERT))
+ info->rotation = OMAP_DSS_ROT_90;
+ else if ((orient & MASK_XY_FLIP) && !(orient & MASK_Y_INVERT))
+ info->rotation = OMAP_DSS_ROT_270;
+
omap_gem_rotated_paddr(plane->bo, orient, x, y, &info->paddr);
info->rotation_type = OMAP_DSS_ROT_TILER;
info->screen_width = omap_gem_tiled_stride(plane->bo, orient);
@@ -221,6 +232,7 @@ void omap_framebuffer_update_scanout(struct drm_framebuffer
*fb,
info->paddr = get_linear_addr(plane, format, 0, x, y);
info->rotation_type = OMAP_DSS_ROT_DMA;
+ info->rotation = OMAP_DSS_ROT_0;
info->screen_width = plane->pitch;
}
--
2.7.4
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
