Hi Tomi,
Thank you for the patch.
On Thursday 04 May 2017 13:23:24 Tomi Valkeinen wrote:
> In a few places the dispc driver needs to know whether the pixel format
> is an YUV format. Add a helper to figure that out.
>
> Signed-off-by: Tomi Valkeinen <tomi.valkei...@ti.com>
> ---
> drivers/gpu/drm/omapdrm/dss/dispc.c | 56 ++++++++++++++--------------------
> 1 file changed, 23 insertions(+), 33 deletions(-)
>
> diff --git a/drivers/gpu/drm/omapdrm/dss/dispc.c
> b/drivers/gpu/drm/omapdrm/dss/dispc.c index 48bb71eafa56..9dfef8fdff67
> 100644
> --- a/drivers/gpu/drm/omapdrm/dss/dispc.c
> +++ b/drivers/gpu/drm/omapdrm/dss/dispc.c
> @@ -978,6 +978,18 @@ static void dispc_ovl_set_color_mode(enum omap_plane_id
> plane, REG_FLD_MOD(DISPC_OVL_ATTRIBUTES(plane), m, 4, 1);
> }
>
> +static bool format_is_yuv(enum omap_color_mode color_mode)
> +{
> + switch (color_mode) {
> + case OMAP_DSS_COLOR_YUV2:
> + case OMAP_DSS_COLOR_UYVY:
> + case OMAP_DSS_COLOR_NV12:
> + return true;
> + default:
> + return false;
> + }
> +}
> +
> static void dispc_ovl_configure_burst_type(enum omap_plane_id plane,
> enum omap_dss_rotation_type rotation_type)
> {
> @@ -1703,9 +1715,8 @@ static void dispc_ovl_set_scaling_uv(enum
> omap_plane_id plane,
>
> if (!dss_has_feature(FEAT_HANDLE_UV_SEPARATE))
> return;
> - if ((color_mode != OMAP_DSS_COLOR_YUV2 &&
> - color_mode != OMAP_DSS_COLOR_UYVY &&
> - color_mode != OMAP_DSS_COLOR_NV12)) {
> +
> + if (!format_is_yuv(color_mode)) {
> /* reset chroma resampling for RGB formats */
> if (plane != OMAP_DSS_WB)
> REG_FLD_MOD(DISPC_OVL_ATTRIBUTES2(plane), 0, 8, 8);
> @@ -2384,19 +2395,9 @@ static int dispc_ovl_setup_common(enum omap_plane_id
> plane, if (paddr == 0 && rotation_type != OMAP_DSS_ROT_TILER)
> return -EINVAL;
>
> - switch (color_mode) {
> - case OMAP_DSS_COLOR_YUV2:
> - case OMAP_DSS_COLOR_UYVY:
> - case OMAP_DSS_COLOR_NV12:
> - if (in_width & 1) {
> - DSSERR("input width %d is not even for YUV format\n",
> - in_width);
> - return -EINVAL;
> - }
> - break;
> -
> - default:
> - break;
> + if (format_is_yuv(color_mode) && (in_width & 1)) {
> + DSSERR("input width %d is not even for YUV format\n",
in_width);
> + return -EINVAL;
> }
This is a condition that should be checked by omapdrm in the atomic_check
phase, to avoid returning an error in the atomic_commit phase.
> out_width = out_width == 0 ? width : out_width;
> @@ -2433,26 +2434,15 @@ static int dispc_ovl_setup_common(enum omap_plane_id
> plane, DSSDBG("predecimation %d x %x, new input size %d x %d\n",
> x_predecim, y_predecim, in_width, in_height);
>
> - switch (color_mode) {
> - case OMAP_DSS_COLOR_YUV2:
> - case OMAP_DSS_COLOR_UYVY:
> - case OMAP_DSS_COLOR_NV12:
> - if (in_width & 1) {
> - DSSDBG("predecimated input width is not even for YUV
format\n");
> - DSSDBG("adjusting input width %d -> %d\n",
> - in_width, in_width & ~1);
> -
> - in_width &= ~1;
> - }
> - break;
> + if (format_is_yuv(color_mode) && (in_width & 1)) {
> + DSSDBG("predecimated input width is not even for YUV
format\n");
> + DSSDBG("adjusting input width %d -> %d\n",
> + in_width, in_width & ~1);
>
> - default:
> - break;
> + in_width &= ~1;
> }
Same here.
We can fix that as a follow-up patch, so
Reviewed-by: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
> - if (color_mode == OMAP_DSS_COLOR_YUV2 ||
> - color_mode == OMAP_DSS_COLOR_UYVY ||
> - color_mode == OMAP_DSS_COLOR_NV12)
> + if (format_is_yuv(color_mode))
> cconv = 1;
>
> if (ilace && !fieldmode) {
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
