The PL111 in the ARM reference platforms are connected to
"panels" that are actually dumb VGA DAC connector bridges.
Now that we can support the proper bridges in the DRM driver,
fix this up.

Cc: Liviu Dudau <liviu.du...@arm.com>
Cc: Mali DP Maintainers <mal...@foss.arm.com>
Signed-off-by: Linus Walleij <linus.wall...@linaro.org>
---
 arch/arm/boot/dts/arm-realview-eb.dtsi | 64 +++++++++++++++++++++-------------
 1 file changed, 40 insertions(+), 24 deletions(-)

diff --git a/arch/arm/boot/dts/arm-realview-eb.dtsi 
b/arch/arm/boot/dts/arm-realview-eb.dtsi
index e2e9599596e2..a917cf8825ca 100644
--- a/arch/arm/boot/dts/arm-realview-eb.dtsi
+++ b/arch/arm/boot/dts/arm-realview-eb.dtsi
@@ -143,6 +143,43 @@
                port1-otg;
        };
 
+       bridge {
+               compatible = "ti,ths8134a", "ti,ths8134";
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               ports {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       port@0 {
+                               reg = <0>;
+
+                               vga_bridge_in: endpoint {
+                                       remote-endpoint = <&clcd_pads>;
+                               };
+                       };
+
+                       port@1 {
+                               reg = <1>;
+
+                               vga_bridge_out: endpoint {
+                                       remote-endpoint = <&vga_con_in>;
+                               };
+                       };
+               };
+       };
+
+       vga {
+               compatible = "vga-connector";
+
+               port {
+                       vga_con_in: endpoint {
+                               remote-endpoint = <&vga_bridge_out>;
+                       };
+               };
+       };
+
        /* These peripherals are inside the FPGA */
        fpga {
                #address-cells = <1>;
@@ -409,36 +446,15 @@
                        interrupt-names = "combined";
                        clocks = <&oscclk0>, <&pclk>;
                        clock-names = "clcdclk", "apb_pclk";
+                       /* 1024x768 16bpp @65MHz works fine */
+                       max-memory-bandwidth = <95000000>;
 
                        port {
                                clcd_pads: endpoint {
-                                       remote-endpoint = <&clcd_panel>;
+                                       remote-endpoint = <&vga_bridge_in>;
                                        arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
                                };
                        };
-
-                       panel {
-                               compatible = "panel-dpi";
-
-                               port {
-                                       clcd_panel: endpoint {
-                                               remote-endpoint = <&clcd_pads>;
-                                       };
-                               };
-
-                               /* Standard 640x480 VGA timings */
-                               panel-timing {
-                                       clock-frequency = <25175000>;
-                                       hactive = <640>;
-                                       hback-porch = <48>;
-                                       hfront-porch = <16>;
-                                       hsync-len = <96>;
-                                       vactive = <480>;
-                                       vback-porch = <33>;
-                                       vfront-porch = <10>;
-                                       vsync-len = <2>;
-                               };
-                       };
                };
        };
 };
-- 
2.14.3

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Reply via email to