The PL111 in the ARM reference platforms are connected to
"panels" that are actually dumb VGA DAC connector bridges.
Now that we can support the proper bridges in the DRM driver,
fix this up.
Cc: Liviu Dudau <liviu.du...@arm.com>
Cc: Mali DP Maintainers <mal...@foss.arm.com>
Signed-off-by: Linus Walleij <linus.wall...@linaro.org>
---
arch/arm/boot/dts/arm-realview-pbx.dtsi | 82 ++++++++++++++++++++++-----------
1 file changed, 55 insertions(+), 27 deletions(-)
diff --git a/arch/arm/boot/dts/arm-realview-pbx.dtsi
b/arch/arm/boot/dts/arm-realview-pbx.dtsi
index aeb49c4bd773..10868ba3277f 100644
--- a/arch/arm/boot/dts/arm-realview-pbx.dtsi
+++ b/arch/arm/boot/dts/arm-realview-pbx.dtsi
@@ -34,7 +34,8 @@
serial1 = &serial1;
serial2 = &serial2;
serial3 = &serial3;
- i2c0 = &i2c;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
};
memory {
@@ -158,6 +159,49 @@
port1-otg;
};
+ bridge {
+ compatible = "ti,ths8134a", "ti,ths8134";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ vga_bridge_in: endpoint {
+ remote-endpoint = <&clcd_pads>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ vga_bridge_out: endpoint {
+ remote-endpoint = <&vga_con_in>;
+ };
+ };
+ };
+ };
+
+ vga {
+ /*
+ * This DDC I2C is connected directly to the DVI portions
+ * of the connector, so it's not really working when the
+ * monitor is connected to the VGA connector.
+ */
+ compatible = "vga-connector";
+ ddc-i2c-bus = <&i2c1>;
+
+ port {
+ vga_con_in: endpoint {
+ remote-endpoint = <&vga_bridge_out>;
+ };
+ };
+ };
+
soc: soc@0 {
compatible = "arm,realview-pbx-soc", "simple-bus";
#address-cells = <1>;
@@ -285,7 +329,7 @@
<&timclk>;
};
- i2c: i2c@10002000 {
+ i2c0: i2c@10002000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "arm,versatile-i2c";
@@ -396,7 +440,12 @@
clock-names = "apb_pclk";
};
- /* DVI serial bus control is at 10016000 */
+ i2c1: i2c@10016000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "arm,versatile-i2c";
+ reg = <0x10016000 0x1000>;
+ };
rtc: rtc@10017000 {
compatible = "arm,pl031", "arm,primecell";
@@ -506,36 +555,15 @@
interrupt-names = "combined";
clocks = <&oscclk4>, <&pclk>;
clock-names = "clcdclk", "apb_pclk";
+ /* 1024x768 16bpp @65MHz works fine */
+ max-memory-bandwidth = <95000000>;
port {
clcd_pads: endpoint {
- remote-endpoint = <&clcd_panel>;
+ remote-endpoint = <&vga_bridge_in>;
arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
};
};
-
- panel {
- compatible = "panel-dpi";
-
- port {
- clcd_panel: endpoint {
- remote-endpoint = <&clcd_pads>;
- };
- };
-
- /* Standard 640x480 VGA timings */
- panel-timing {
- clock-frequency = <25175000>;
- hactive = <640>;
- hback-porch = <48>;
- hfront-porch = <16>;
- hsync-len = <96>;
- vactive = <480>;
- vback-porch = <33>;
- vfront-porch = <10>;
- vsync-len = <2>;
- };
- };
};
};
};
--
2.14.3
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
