Hi Jacopo,

Thank you for the patch.

On Friday, 6 April 2018 16:08:12 EEST Jacopo Mondi wrote:
> From: Niklas Söderlund <niklas.soderlund+rene...@ragnatech.se>
> 
> Enable HDMI output adding the HDMI connector and the ADV7511W, connected
> to THC63LVD1024 LVDS decoder output.
> 
> Signed-off-by: Niklas Söderlund <niklas.soderlund+rene...@ragnatech.se>
> Signed-off-by: Jacopo Mondi <jacopo+rene...@jmondi.org>
> ---
>  arch/arm64/boot/dts/renesas/r8a77970-eagle.dts | 51 ++++++++++++++++++++++-
>  1 file changed, 50 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
> b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts index 9d0e65d..e9f7b83
> 100644
> --- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
> +++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
> @@ -32,6 +32,17 @@
>               reg = <0x0 0x48000000 0x0 0x38000000>;
>       };
> 
> +     hdmi-out {
> +             compatible = "hdmi-connector";
> +             type = "a";
> +
> +             port {
> +                     hdmi_con_out: endpoint {
> +                             remote-endpoint = <&adv7511_out>;
> +                     };
> +             };
> +     };
> +
>       thc63lvd1024: lvds-decoder {
>               compatible = "thine,thc63lvd1024";
> 
> @@ -41,11 +52,17 @@
> 
>                       port@0 {
>                               reg = <0>;
> -

This is unrelated, if you don't want a blank line here remove it from patch 
6/7 :-)

>                               thc63lvd1024_in: endpoint {
>                                       remote-endpoint = <&lvds0_out>;
>                               };
>                       };
> +
> +                     port@2 {
> +                             reg = <2>;
> +                             thc63lvd1024_out: endpoint {
> +                                     remote-endpoint = <&adv7511_in>;
> +                             };
> +                     };
>               };
>       };
>  };
> @@ -85,6 +102,38 @@
>               gpio-controller;
>               #gpio-cells = <2>;
>       };
> +
> +     hdmi@39 {
> +             compatible = "adi,adv7511w";
> +             reg = <0x39>;
> +             interrupt-parent = <&gpio1>;
> +             interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
> +
> +             adi,input-depth = <8>;
> +             adi,input-colorspace = "rgb";
> +             adi,input-clock = "1x";
> +             adi,input-style = <1>;
> +             adi,input-justification = "evenly";
> +
> +             ports {
> +                     #address-cells = <1>;
> +                     #size-cells = <0>;
> +
> +                     port@0 {
> +                             reg = <0>;
> +                             adv7511_in: endpoint {
> +                                     remote-endpoint = <&thc63lvd1024_out>;
> +                             };
> +                     };
> +
> +                     port@1 {
> +                             reg = <1>;
> +                             adv7511_out: endpoint {
> +                                     remote-endpoint = <&hdmi_con_out>;
> +                             };
> +                     };
> +             };
> +     };
>  };
> 
>  &pfc {

With patches 5/7, 6/7 and 7/7 merged together and the pinmux removed,

Reviewed-by: Laurent Pinchart <laurent.pinch...@ideasonboard.com>

-- 
Regards,

Laurent Pinchart



_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Reply via email to