[PATCH 09/12] dt-bindings: panel: Add Bananapi S070WV20-CT16 MIPI-DSI panel bindings

[Jagan Teki]

Bananapi S070WV20-CT16 is 800x480, 4-lane MIPI-DSI panel, the
same panel PCB comes with parallel RBG which is supported via
panel-simple with "bananapi,s070wv20-ct16" compatible.

Signed-off-by: Jagan Teki <ja...@amarulasolutions.com>
---
 .../panel/bananapi,s070wv20-ct16-dsi.txt      | 21 +++++++++++++++++++
 1 file changed, 21 insertions(+)
 create mode 100644 
Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16-dsi.txt

diff --git 
a/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16-dsi.txt
 
b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16-dsi.txt
new file mode 100644
index 000000000000..c477163f7999
--- /dev/null
+++ 
b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16-dsi.txt
@@ -0,0 +1,21 @@
+Bananapi S070WV20 CT16 MIPI-DSI panel
+
+Required properties:
+- compatible: must be "bananapi,s070wv20-ct16-dsi"
+- reg: DSI virtual channel used by that screen
+- avdd-supply: analog regulator dc1 switch
+- dvdd-supply: 3v3 digital regulator
+- reset-gpios: a GPIO phandle for the reset pin
+
+Optional properties:
+- backlight: phandle for the backlight control.
+
+Example:
+panel@0 {
+       compatible = "bananapi,s070wv20-ct16-dsi";
+       reg = <0>;
+       avdd-supply = <&reg_dc1sw>;
+       dvdd-supply = <&reg_dldo1>;
+       reset-gpios = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */
+       backlight = <&backlight_dsi>;
+};
-- 
2.18.0.321.gffc6fa0e3

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel