On Fri, Oct 26, 2018 at 08:13:34PM +0530, Jagan Teki wrote:
> Unlike hblk, the vblk timings should follow an equation to compute
> the desired value for lane 4 devices and rest of devices it would be 0.
> 
> BSP code from BPI-M64-bsp is computing vblk as for 4-lane devices
> (in drivers/video/sunxi/disp2/disp/de/lowlevel_sun50iw1/de_dsi.c)
> tmp = (ht*dsi_pixel_bits[format]/8)*vt-(4+dsi_hblk+2);
> dsi_vblk = (lane-tmp%lane);
> 
> So, update the vblk timing calculation accordingly.
> 
> Tested on 2-lane, 4-lane MIPI-DSI LCD panels.
> 
> Signed-off-by: Jagan Teki <ja...@amarulasolutions.com>
> Tested-by: Jagan Teki <ja...@amarulasolutions.com>
> ---
> Changes for v3:
> - new patch
> Changes for v2:
> - none
> 
>  drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 13 ++++++++++++-
>  1 file changed, 12 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c 
> b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> index 20e330186b7f..42bd7506abaf 100644
> --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> @@ -511,8 +511,19 @@ static void sun6i_dsi_setup_timings(struct sun6i_dsi 
> *dsi,
>        * Allwinner BSP is using a rather convoluted calculation
>        * there only for 4 lanes. However, using 0 (the !4 lanes
>        * case) even with a 4 lanes screen seems to work...

Since you're adding the support for 2 lanes DSI displays, that should
be removed.

> +      *
> +      * The vertical blank is set using a blanking packet (4 bytes +
> +      * payload + 2 bytes). Its minimal size is therefore 6 bytes
>        */
> -     vblk = 0;
> +#define VBLK_PACKET_OVERHEAD 6
> +     if (device->lanes == 4) {
> +             int tmp;
> +
> +             tmp = (mode->htotal * Bpp) * mode->vtotal - (hblk + 
> VBLK_PACKET_OVERHEAD);
> +             vblk =(device->lanes - tmp % device->lanes);

This generates a checkpatch warning. You should run all your patches
through checkpatch before sending them.

Maxime

-- 
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Attachment: signature.asc
Description: PGP signature

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Reply via email to