[PATCH v3 02/15] drm/mxsfb: Read bus flags from bridge if present

[Robert Chiras]

From: Guido Günther <a...@sigxcpu.org>

The bridge might have special requirmentes on the input bus. This
is e.g. used by the imx-nwl bridge.

Signed-off-by: Guido Günther <a...@sigxcpu.org>
Reviewed-by: Stefan Agner <ste...@agner.ch>
---
 drivers/gpu/drm/mxsfb/mxsfb_crtc.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/mxsfb/mxsfb_crtc.c 
b/drivers/gpu/drm/mxsfb/mxsfb_crtc.c
index de09b93..b69ace8 100644
--- a/drivers/gpu/drm/mxsfb/mxsfb_crtc.c
+++ b/drivers/gpu/drm/mxsfb/mxsfb_crtc.c
@@ -209,7 +209,7 @@ static void mxsfb_crtc_mode_set_nofb(struct 
mxsfb_drm_private *mxsfb)
 {
        struct drm_device *drm = mxsfb->pipe.crtc.dev;
        struct drm_display_mode *m = &mxsfb->pipe.crtc.state->adjusted_mode;
-       const u32 bus_flags = mxsfb->connector->display_info.bus_flags;
+       u32 bus_flags = mxsfb->connector->display_info.bus_flags;
        u32 vdctrl0, vsync_pulse_len, hsync_pulse_len;
        int err;
 
@@ -233,6 +233,9 @@ static void mxsfb_crtc_mode_set_nofb(struct 
mxsfb_drm_private *mxsfb)
 
        clk_set_rate(mxsfb->clk, m->crtc_clock * 1000);
 
+       if (mxsfb->bridge && mxsfb->bridge->timings)
+               bus_flags = mxsfb->bridge->timings->input_bus_flags;
+
        DRM_DEV_DEBUG_DRIVER(drm->dev, "Pixel clock: %dkHz (actual: %dkHz)\n",
                             m->crtc_clock,
                             (int)(clk_get_rate(mxsfb->clk) / 1000));
-- 
2.7.4