The COB allocation depends on the HVS channel used for a given
pixelvalve.
While the channel allocation was entirely static in vc4, vc5 changes
that and at bind time, a pixelvalve can be assigned to multiple
HVS channels.
Let's prepare that rework by allocating the COB when it's actually
needed.
Signed-off-by: Maxime Ripard <max...@cerno.tech>
---
drivers/gpu/drm/vc4/vc4_crtc.c | 36 ++++++++++++++++-------------------
drivers/gpu/drm/vc4/vc4_drv.h | 2 +--
2 files changed, 17 insertions(+), 21 deletions(-)
diff --git a/drivers/gpu/drm/vc4/vc4_crtc.c b/drivers/gpu/drm/vc4/vc4_crtc.c
index 5e1d234f3c8e..d58f881649d5 100644
--- a/drivers/gpu/drm/vc4/vc4_crtc.c
+++ b/drivers/gpu/drm/vc4/vc4_crtc.c
@@ -65,6 +65,20 @@ static const struct debugfs_reg32 crtc_regs[] = {
VC4_REG32(PV_HACT_ACT),
};
+static unsigned int
+vc4_crtc_get_cob_allocation(struct vc4_dev *vc4, unsigned int channel)
+{
+ u32 dispbase = HVS_READ(SCALER_DISPBASEX(channel));
+ /* Top/base are supposed to be 4-pixel aligned, but the
+ * Raspberry Pi firmware fills the low bits (which are
+ * presumably ignored).
+ */
+ u32 top = VC4_GET_FIELD(dispbase, SCALER_DISPBASEX_TOP) & ~3;
+ u32 base = VC4_GET_FIELD(dispbase, SCALER_DISPBASEX_BASE) & ~3;
+
+ return top - base + 4;
+}
+
static bool vc4_crtc_get_scanout_position(struct drm_crtc *crtc,
bool in_vblank_irq,
int *vpos, int *hpos,
@@ -74,6 +88,7 @@ static bool vc4_crtc_get_scanout_position(struct drm_crtc
*crtc,
struct drm_device *dev = crtc->dev;
struct vc4_dev *vc4 = to_vc4_dev(dev);
struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
+ unsigned int cob_size;
u32 val;
int fifo_lines;
int vblank_lines;
@@ -109,8 +124,9 @@ static bool vc4_crtc_get_scanout_position(struct drm_crtc
*crtc,
*hpos += mode->crtc_htotal / 2;
}
+ cob_size = vc4_crtc_get_cob_allocation(vc4, vc4_crtc->channel);
/* This is the offset we need for translating hvs -> pv scanout pos. */
- fifo_lines = vc4_crtc->cob_size / mode->crtc_hdisplay;
+ fifo_lines = cob_size / mode->crtc_hdisplay;
if (fifo_lines > 0)
ret = true;
@@ -1106,22 +1122,6 @@ static void vc4_set_crtc_possible_masks(struct
drm_device *drm,
}
}
-static void
-vc4_crtc_get_cob_allocation(struct vc4_crtc *vc4_crtc)
-{
- struct drm_device *drm = vc4_crtc->base.dev;
- struct vc4_dev *vc4 = to_vc4_dev(drm);
- u32 dispbase = HVS_READ(SCALER_DISPBASEX(vc4_crtc->channel));
- /* Top/base are supposed to be 4-pixel aligned, but the
- * Raspberry Pi firmware fills the low bits (which are
- * presumably ignored).
- */
- u32 top = VC4_GET_FIELD(dispbase, SCALER_DISPBASEX_TOP) & ~3;
- u32 base = VC4_GET_FIELD(dispbase, SCALER_DISPBASEX_BASE) & ~3;
-
- vc4_crtc->cob_size = top - base + 4;
-}
-
static int vc4_crtc_bind(struct device *dev, struct device *master, void *data)
{
struct platform_device *pdev = to_platform_device(dev);
@@ -1176,8 +1176,6 @@ static int vc4_crtc_bind(struct device *dev, struct
device *master, void *data)
*/
drm_crtc_enable_color_mgmt(crtc, 0, true, crtc->gamma_size);
- vc4_crtc_get_cob_allocation(vc4_crtc);
-
CRTC_WRITE(PV_INTEN, 0);
CRTC_WRITE(PV_INTSTAT, PV_INT_VFP_START);
ret = devm_request_irq(dev, platform_get_irq(pdev, 0),
diff --git a/drivers/gpu/drm/vc4/vc4_drv.h b/drivers/gpu/drm/vc4/vc4_drv.h
index 8c0f714f557b..6c4b78b71446 100644
--- a/drivers/gpu/drm/vc4/vc4_drv.h
+++ b/drivers/gpu/drm/vc4/vc4_drv.h
@@ -475,8 +475,6 @@ struct vc4_crtc {
u8 lut_r[256];
u8 lut_g[256];
u8 lut_b[256];
- /* Size in pixels of the COB memory allocated to this CRTC. */
- u32 cob_size;
struct drm_pending_vblank_event *event;
--
git-series 0.9.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
