All the functionality in this driver has been reimplemented
in the new DRM driver in drivers/gpu/drm/pl111/* and all
the boards using it have been migrated to use the DRM driver
with all configuration coming from the device tree.
I started the work to migrate the CLCD driver to DRM in
april 2017 and it took a little more than 3 years to do this
properly without leaving any platforms behind.
Cc: Russell King <li...@armlinux.org.uk>
Signed-off-by: Linus Walleij <linus.wall...@linaro.org>
---
As the framebuffer subsystem is orphaned I expect this to
go in through the drm-misc tree.
---
MAINTAINERS | 5 -
drivers/video/fbdev/Kconfig | 20 -
drivers/video/fbdev/Makefile | 1 -
drivers/video/fbdev/amba-clcd.c | 989 --------------------------------
include/linux/amba/clcd.h | 290 ----------
5 files changed, 1305 deletions(-)
delete mode 100644 drivers/video/fbdev/amba-clcd.c
delete mode 100644 include/linux/amba/clcd.h
diff --git a/MAINTAINERS b/MAINTAINERS
index df86f6f06000..086894075397 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1432,11 +1432,6 @@ S: Odd Fixes
F: drivers/amba/
F: include/linux/amba/bus.h
-ARM PRIMECELL CLCD PL110 DRIVER
-M: Russell King <li...@armlinux.org.uk>
-S: Odd Fixes
-F: drivers/video/fbdev/amba-clcd.*
-
ARM PRIMECELL KMI PL050 DRIVER
M: Russell King <li...@armlinux.org.uk>
S: Odd Fixes
diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index fa88e8b9a83d..0a5fc63e05d2 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -272,26 +272,6 @@ config FB_PM2_FIFO_DISCONNECT
help
Support the Permedia2 FIFO disconnect feature.
-config FB_ARMCLCD
- tristate "ARM PrimeCell PL110 support"
- depends on ARM || ARM64 || COMPILE_TEST
- depends on FB && ARM_AMBA && HAS_IOMEM
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- select FB_MODE_HELPERS if OF
- select VIDEOMODE_HELPERS if OF
- select BACKLIGHT_CLASS_DEVICE if OF
- help
- This framebuffer device driver is for the ARM PrimeCell PL110
- Colour LCD controller. ARM PrimeCells provide the building
- blocks for System on a Chip devices.
-
- If you want to compile this as a module (=code which can be
- inserted into and removed from the running kernel), say M
- here and read <file:Documentation/kbuild/modules.rst>. The module
- will be called amba-clcd.
-
config FB_ACORN
bool "Acorn VIDC support"
depends on (FB = y) && ARM && ARCH_ACORN
diff --git a/drivers/video/fbdev/Makefile b/drivers/video/fbdev/Makefile
index aa6352798cf4..76a43ec8f24c 100644
--- a/drivers/video/fbdev/Makefile
+++ b/drivers/video/fbdev/Makefile
@@ -75,7 +75,6 @@ obj-$(CONFIG_FB_HIT) += hitfb.o
obj-$(CONFIG_FB_ATMEL) += atmel_lcdfb.o
obj-$(CONFIG_FB_PVR2) += pvr2fb.o
obj-$(CONFIG_FB_VOODOO1) += sstfb.o
-obj-$(CONFIG_FB_ARMCLCD) += amba-clcd.o
obj-$(CONFIG_FB_GOLDFISH) += goldfishfb.o
obj-$(CONFIG_FB_68328) += 68328fb.o
obj-$(CONFIG_FB_GBE) += gbefb.o
diff --git a/drivers/video/fbdev/amba-clcd.c b/drivers/video/fbdev/amba-clcd.c
deleted file mode 100644
index c3d55fc6c4e0..000000000000
--- a/drivers/video/fbdev/amba-clcd.c
+++ /dev/null
@@ -1,989 +0,0 @@
-/*
- * linux/drivers/video/amba-clcd.c
- *
- * Copyright (C) 2001 ARM Limited, by David A Rusling
- * Updated to 2.5, Deep Blue Solutions Ltd.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive
- * for more details.
- *
- * ARM PrimeCell PL110 Color LCD Controller
- */
-#include <linux/amba/bus.h>
-#include <linux/amba/clcd.h>
-#include <linux/backlight.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/dma-mapping.h>
-#include <linux/fb.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/list.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/of_address.h>
-#include <linux/of_graph.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <video/display_timing.h>
-#include <video/of_display_timing.h>
-#include <video/videomode.h>
-
-#define to_clcd(info) container_of(info, struct clcd_fb, fb)
-
-/* This is limited to 16 characters when displayed by X startup */
-static const char *clcd_name = "CLCD FB";
-
-/*
- * Unfortunately, the enable/disable functions may be called either from
- * process or IRQ context, and we _need_ to delay. This is _not_ good.
- */
-static inline void clcdfb_sleep(unsigned int ms)
-{
- if (in_atomic()) {
- mdelay(ms);
- } else {
- msleep(ms);
- }
-}
-
-static inline void clcdfb_set_start(struct clcd_fb *fb)
-{
- unsigned long ustart = fb->fb.fix.smem_start;
- unsigned long lstart;
-
- ustart += fb->fb.var.yoffset * fb->fb.fix.line_length;
- lstart = ustart + fb->fb.var.yres * fb->fb.fix.line_length / 2;
-
- writel(ustart, fb->regs + CLCD_UBAS);
- writel(lstart, fb->regs + CLCD_LBAS);
-}
-
-static void clcdfb_disable(struct clcd_fb *fb)
-{
- u32 val;
-
- if (fb->board->disable)
- fb->board->disable(fb);
-
- if (fb->panel->backlight) {
- fb->panel->backlight->props.power = FB_BLANK_POWERDOWN;
- backlight_update_status(fb->panel->backlight);
- }
-
- val = readl(fb->regs + fb->off_cntl);
- if (val & CNTL_LCDPWR) {
- val &= ~CNTL_LCDPWR;
- writel(val, fb->regs + fb->off_cntl);
-
- clcdfb_sleep(20);
- }
- if (val & CNTL_LCDEN) {
- val &= ~CNTL_LCDEN;
- writel(val, fb->regs + fb->off_cntl);
- }
-
- /*
- * Disable CLCD clock source.
- */
- if (fb->clk_enabled) {
- fb->clk_enabled = false;
- clk_disable(fb->clk);
- }
-}
-
-static void clcdfb_enable(struct clcd_fb *fb, u32 cntl)
-{
- /*
- * Enable the CLCD clock source.
- */
- if (!fb->clk_enabled) {
- fb->clk_enabled = true;
- clk_enable(fb->clk);
- }
-
- /*
- * Bring up by first enabling..
- */
- cntl |= CNTL_LCDEN;
- writel(cntl, fb->regs + fb->off_cntl);
-
- clcdfb_sleep(20);
-
- /*
- * and now apply power.
- */
- cntl |= CNTL_LCDPWR;
- writel(cntl, fb->regs + fb->off_cntl);
-
- /*
- * Turn on backlight
- */
- if (fb->panel->backlight) {
- fb->panel->backlight->props.power = FB_BLANK_UNBLANK;
- backlight_update_status(fb->panel->backlight);
- }
-
- /*
- * finally, enable the interface.
- */
- if (fb->board->enable)
- fb->board->enable(fb);
-}
-
-static int
-clcdfb_set_bitfields(struct clcd_fb *fb, struct fb_var_screeninfo *var)
-{
- u32 caps;
- int ret = 0;
-
- if (fb->panel->caps && fb->board->caps)
- caps = fb->panel->caps & fb->board->caps;
- else {
- /* Old way of specifying what can be used */
- caps = fb->panel->cntl & CNTL_BGR ?
- CLCD_CAP_BGR : CLCD_CAP_RGB;
- /* But mask out 444 modes as they weren't supported */
- caps &= ~CLCD_CAP_444;
- }
-
- /* Only TFT panels can do RGB888/BGR888 */
- if (!(fb->panel->cntl & CNTL_LCDTFT))
- caps &= ~CLCD_CAP_888;
-
- memset(&var->transp, 0, sizeof(var->transp));
-
- var->red.msb_right = 0;
- var->green.msb_right = 0;
- var->blue.msb_right = 0;
-
- switch (var->bits_per_pixel) {
- case 1:
- case 2:
- case 4:
- case 8:
- /* If we can't do 5551, reject */
- caps &= CLCD_CAP_5551;
- if (!caps) {
- ret = -EINVAL;
- break;
- }
-
- var->red.length = var->bits_per_pixel;
- var->red.offset = 0;
- var->green.length = var->bits_per_pixel;
- var->green.offset = 0;
- var->blue.length = var->bits_per_pixel;
- var->blue.offset = 0;
- break;
-
- case 16:
- /* If we can't do 444, 5551 or 565, reject */
- if (!(caps & (CLCD_CAP_444 | CLCD_CAP_5551 | CLCD_CAP_565))) {
- ret = -EINVAL;
- break;
- }
-
- /*
- * Green length can be 4, 5 or 6 depending whether
- * we're operating in 444, 5551 or 565 mode.
- */
- if (var->green.length == 4 && caps & CLCD_CAP_444)
- caps &= CLCD_CAP_444;
- if (var->green.length == 5 && caps & CLCD_CAP_5551)
- caps &= CLCD_CAP_5551;
- else if (var->green.length == 6 && caps & CLCD_CAP_565)
- caps &= CLCD_CAP_565;
- else {
- /*
- * PL110 officially only supports RGB555,
- * but may be wired up to allow RGB565.
- */
- if (caps & CLCD_CAP_565) {
- var->green.length = 6;
- caps &= CLCD_CAP_565;
- } else if (caps & CLCD_CAP_5551) {
- var->green.length = 5;
- caps &= CLCD_CAP_5551;
- } else {
- var->green.length = 4;
- caps &= CLCD_CAP_444;
- }
- }
-
- if (var->green.length >= 5) {
- var->red.length = 5;
- var->blue.length = 5;
- } else {
- var->red.length = 4;
- var->blue.length = 4;
- }
- break;
- case 32:
- /* If we can't do 888, reject */
- caps &= CLCD_CAP_888;
- if (!caps) {
- ret = -EINVAL;
- break;
- }
-
- var->red.length = 8;
- var->green.length = 8;
- var->blue.length = 8;
- break;
- default:
- ret = -EINVAL;
- break;
- }
-
- /*
- * >= 16bpp displays have separate colour component bitfields
- * encoded in the pixel data. Calculate their position from
- * the bitfield length defined above.
- */
- if (ret == 0 && var->bits_per_pixel >= 16) {
- bool bgr, rgb;
-
- bgr = caps & CLCD_CAP_BGR && var->blue.offset == 0;
- rgb = caps & CLCD_CAP_RGB && var->red.offset == 0;
-
- if (!bgr && !rgb)
- /*
- * The requested format was not possible, try just
- * our capabilities. One of BGR or RGB must be
- * supported.
- */
- bgr = caps & CLCD_CAP_BGR;
-
- if (bgr) {
- var->blue.offset = 0;
- var->green.offset = var->blue.offset + var->blue.length;
- var->red.offset = var->green.offset + var->green.length;
- } else {
- var->red.offset = 0;
- var->green.offset = var->red.offset + var->red.length;
- var->blue.offset = var->green.offset +
var->green.length;
- }
- }
-
- return ret;
-}
-
-static int clcdfb_check_var(struct fb_var_screeninfo *var, struct fb_info
*info)
-{
- struct clcd_fb *fb = to_clcd(info);
- int ret = -EINVAL;
-
- if (fb->board->check)
- ret = fb->board->check(fb, var);
-
- if (ret == 0 &&
- var->xres_virtual * var->bits_per_pixel / 8 *
- var->yres_virtual > fb->fb.fix.smem_len)
- ret = -EINVAL;
-
- if (ret == 0)
- ret = clcdfb_set_bitfields(fb, var);
-
- return ret;
-}
-
-static int clcdfb_set_par(struct fb_info *info)
-{
- struct clcd_fb *fb = to_clcd(info);
- struct clcd_regs regs;
-
- fb->fb.fix.line_length = fb->fb.var.xres_virtual *
- fb->fb.var.bits_per_pixel / 8;
-
- if (fb->fb.var.bits_per_pixel <= 8)
- fb->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR;
- else
- fb->fb.fix.visual = FB_VISUAL_TRUECOLOR;
-
- fb->board->decode(fb, ®s);
-
- clcdfb_disable(fb);
-
- writel(regs.tim0, fb->regs + CLCD_TIM0);
- writel(regs.tim1, fb->regs + CLCD_TIM1);
- writel(regs.tim2, fb->regs + CLCD_TIM2);
- writel(regs.tim3, fb->regs + CLCD_TIM3);
-
- clcdfb_set_start(fb);
-
- clk_set_rate(fb->clk, (1000000000 / regs.pixclock) * 1000);
-
- fb->clcd_cntl = regs.cntl;
-
- clcdfb_enable(fb, regs.cntl);
-
-#ifdef DEBUG
- printk(KERN_INFO
- "CLCD: Registers set to\n"
- " %08x %08x %08x %08x\n"
- " %08x %08x %08x %08x\n",
- readl(fb->regs + CLCD_TIM0), readl(fb->regs + CLCD_TIM1),
- readl(fb->regs + CLCD_TIM2), readl(fb->regs + CLCD_TIM3),
- readl(fb->regs + CLCD_UBAS), readl(fb->regs + CLCD_LBAS),
- readl(fb->regs + fb->off_ienb), readl(fb->regs + fb->off_cntl));
-#endif
-
- return 0;
-}
-
-static inline u32 convert_bitfield(int val, struct fb_bitfield *bf)
-{
- unsigned int mask = (1 << bf->length) - 1;
-
- return (val >> (16 - bf->length) & mask) << bf->offset;
-}
-
-/*
- * Set a single color register. The values supplied have a 16 bit
- * magnitude. Return != 0 for invalid regno.
- */
-static int
-clcdfb_setcolreg(unsigned int regno, unsigned int red, unsigned int green,
- unsigned int blue, unsigned int transp, struct fb_info *info)
-{
- struct clcd_fb *fb = to_clcd(info);
-
- if (regno < 16)
- fb->cmap[regno] = convert_bitfield(transp, &fb->fb.var.transp) |
- convert_bitfield(blue, &fb->fb.var.blue) |
- convert_bitfield(green, &fb->fb.var.green) |
- convert_bitfield(red, &fb->fb.var.red);
-
- if (fb->fb.fix.visual == FB_VISUAL_PSEUDOCOLOR && regno < 256) {
- int hw_reg = CLCD_PALETTE + ((regno * 2) & ~3);
- u32 val, mask, newval;
-
- newval = (red >> 11) & 0x001f;
- newval |= (green >> 6) & 0x03e0;
- newval |= (blue >> 1) & 0x7c00;
-
- /*
- * 3.2.11: if we're configured for big endian
- * byte order, the palette entries are swapped.
- */
- if (fb->clcd_cntl & CNTL_BEBO)
- regno ^= 1;
-
- if (regno & 1) {
- newval <<= 16;
- mask = 0x0000ffff;
- } else {
- mask = 0xffff0000;
- }
-
- val = readl(fb->regs + hw_reg) & mask;
- writel(val | newval, fb->regs + hw_reg);
- }
-
- return regno > 255;
-}
-
-/*
- * Blank the screen if blank_mode != 0, else unblank. If blank == NULL
- * then the caller blanks by setting the CLUT (Color Look Up Table) to all
- * black. Return 0 if blanking succeeded, != 0 if un-/blanking failed due
- * to e.g. a video mode which doesn't support it. Implements VESA suspend
- * and powerdown modes on hardware that supports disabling hsync/vsync:
- * blank_mode == 2: suspend vsync
- * blank_mode == 3: suspend hsync
- * blank_mode == 4: powerdown
- */
-static int clcdfb_blank(int blank_mode, struct fb_info *info)
-{
- struct clcd_fb *fb = to_clcd(info);
-
- if (blank_mode != 0) {
- clcdfb_disable(fb);
- } else {
- clcdfb_enable(fb, fb->clcd_cntl);
- }
- return 0;
-}
-
-static int clcdfb_mmap(struct fb_info *info,
- struct vm_area_struct *vma)
-{
- struct clcd_fb *fb = to_clcd(info);
- unsigned long len, off = vma->vm_pgoff << PAGE_SHIFT;
- int ret = -EINVAL;
-
- len = info->fix.smem_len;
-
- if (off <= len && vma->vm_end - vma->vm_start <= len - off &&
- fb->board->mmap)
- ret = fb->board->mmap(fb, vma);
-
- return ret;
-}
-
-static const struct fb_ops clcdfb_ops = {
- .owner = THIS_MODULE,
- .fb_check_var = clcdfb_check_var,
- .fb_set_par = clcdfb_set_par,
- .fb_setcolreg = clcdfb_setcolreg,
- .fb_blank = clcdfb_blank,
- .fb_fillrect = cfb_fillrect,
- .fb_copyarea = cfb_copyarea,
- .fb_imageblit = cfb_imageblit,
- .fb_mmap = clcdfb_mmap,
-};
-
-static int clcdfb_register(struct clcd_fb *fb)
-{
- int ret;
-
- /*
- * ARM PL111 always has IENB at 0x1c; it's only PL110
- * which is reversed on some platforms.
- */
- if (amba_manf(fb->dev) == 0x41 && amba_part(fb->dev) == 0x111) {
- fb->off_ienb = CLCD_PL111_IENB;
- fb->off_cntl = CLCD_PL111_CNTL;
- } else {
- fb->off_ienb = CLCD_PL110_IENB;
- fb->off_cntl = CLCD_PL110_CNTL;
- }
-
- fb->clk = clk_get(&fb->dev->dev, NULL);
- if (IS_ERR(fb->clk)) {
- ret = PTR_ERR(fb->clk);
- goto out;
- }
-
- ret = clk_prepare(fb->clk);
- if (ret)
- goto free_clk;
-
- fb->fb.device = &fb->dev->dev;
-
- fb->fb.fix.mmio_start = fb->dev->res.start;
- fb->fb.fix.mmio_len = resource_size(&fb->dev->res);
-
- fb->regs = ioremap(fb->fb.fix.mmio_start, fb->fb.fix.mmio_len);
- if (!fb->regs) {
- printk(KERN_ERR "CLCD: unable to remap registers\n");
- ret = -ENOMEM;
- goto clk_unprep;
- }
-
- fb->fb.fbops = &clcdfb_ops;
- fb->fb.flags = FBINFO_FLAG_DEFAULT;
- fb->fb.pseudo_palette = fb->cmap;
-
- strncpy(fb->fb.fix.id, clcd_name, sizeof(fb->fb.fix.id));
- fb->fb.fix.type = FB_TYPE_PACKED_PIXELS;
- fb->fb.fix.type_aux = 0;
- fb->fb.fix.xpanstep = 0;
- fb->fb.fix.ypanstep = 0;
- fb->fb.fix.ywrapstep = 0;
- fb->fb.fix.accel = FB_ACCEL_NONE;
-
- fb->fb.var.xres = fb->panel->mode.xres;
- fb->fb.var.yres = fb->panel->mode.yres;
- fb->fb.var.xres_virtual = fb->panel->mode.xres;
- fb->fb.var.yres_virtual = fb->panel->mode.yres;
- fb->fb.var.bits_per_pixel = fb->panel->bpp;
- fb->fb.var.grayscale = fb->panel->grayscale;
- fb->fb.var.pixclock = fb->panel->mode.pixclock;
- fb->fb.var.left_margin = fb->panel->mode.left_margin;
- fb->fb.var.right_margin = fb->panel->mode.right_margin;
- fb->fb.var.upper_margin = fb->panel->mode.upper_margin;
- fb->fb.var.lower_margin = fb->panel->mode.lower_margin;
- fb->fb.var.hsync_len = fb->panel->mode.hsync_len;
- fb->fb.var.vsync_len = fb->panel->mode.vsync_len;
- fb->fb.var.sync = fb->panel->mode.sync;
- fb->fb.var.vmode = fb->panel->mode.vmode;
- fb->fb.var.activate = FB_ACTIVATE_NOW;
- fb->fb.var.nonstd = 0;
- fb->fb.var.height = fb->panel->height;
- fb->fb.var.width = fb->panel->width;
- fb->fb.var.accel_flags = 0;
-
- fb->fb.monspecs.hfmin = 0;
- fb->fb.monspecs.hfmax = 100000;
- fb->fb.monspecs.vfmin = 0;
- fb->fb.monspecs.vfmax = 400;
- fb->fb.monspecs.dclkmin = 1000000;
- fb->fb.monspecs.dclkmax = 100000000;
-
- /*
- * Make sure that the bitfields are set appropriately.
- */
- clcdfb_set_bitfields(fb, &fb->fb.var);
-
- /*
- * Allocate colourmap.
- */
- ret = fb_alloc_cmap(&fb->fb.cmap, 256, 0);
- if (ret)
- goto unmap;
-
- /*
- * Ensure interrupts are disabled.
- */
- writel(0, fb->regs + fb->off_ienb);
-
- fb_set_var(&fb->fb, &fb->fb.var);
-
- dev_info(&fb->dev->dev, "%s hardware, %s display\n",
- fb->board->name, fb->panel->mode.name);
-
- ret = register_framebuffer(&fb->fb);
- if (ret == 0)
- goto out;
-
- printk(KERN_ERR "CLCD: cannot register framebuffer (%d)\n", ret);
-
- fb_dealloc_cmap(&fb->fb.cmap);
- unmap:
- iounmap(fb->regs);
- clk_unprep:
- clk_unprepare(fb->clk);
- free_clk:
- clk_put(fb->clk);
- out:
- return ret;
-}
-
-#ifdef CONFIG_OF
-static int clcdfb_of_get_dpi_panel_mode(struct device_node *node,
- struct clcd_panel *clcd_panel)
-{
- int err;
- struct display_timing timing;
- struct videomode video;
-
- err = of_get_display_timing(node, "panel-timing", &timing);
- if (err) {
- pr_err("%pOF: problems parsing panel-timing (%d)\n", node, err);
- return err;
- }
-
- videomode_from_timing(&timing, &video);
-
- err = fb_videomode_from_videomode(&video, &clcd_panel->mode);
- if (err)
- return err;
-
- /* Set up some inversion flags */
- if (timing.flags & DISPLAY_FLAGS_PIXDATA_NEGEDGE)
- clcd_panel->tim2 |= TIM2_IPC;
- else if (!(timing.flags & DISPLAY_FLAGS_PIXDATA_POSEDGE))
- /*
- * To preserve backwards compatibility, the IPC (inverted
- * pixel clock) flag needs to be set on any display that
- * doesn't explicitly specify that the pixel clock is
- * active on the negative or positive edge.
- */
- clcd_panel->tim2 |= TIM2_IPC;
-
- if (timing.flags & DISPLAY_FLAGS_HSYNC_LOW)
- clcd_panel->tim2 |= TIM2_IHS;
-
- if (timing.flags & DISPLAY_FLAGS_VSYNC_LOW)
- clcd_panel->tim2 |= TIM2_IVS;
-
- if (timing.flags & DISPLAY_FLAGS_DE_LOW)
- clcd_panel->tim2 |= TIM2_IOE;
-
- return 0;
-}
-
-static int clcdfb_snprintf_mode(char *buf, int size, struct fb_videomode *mode)
-{
- return snprintf(buf, size, "%ux%u@%u", mode->xres, mode->yres,
- mode->refresh);
-}
-
-static int clcdfb_of_get_backlight(struct device_node *panel,
- struct clcd_panel *clcd_panel)
-{
- struct device_node *backlight;
-
- /* Look up the optional backlight phandle */
- backlight = of_parse_phandle(panel, "backlight", 0);
- if (backlight) {
- clcd_panel->backlight = of_find_backlight_by_node(backlight);
- of_node_put(backlight);
-
- if (!clcd_panel->backlight)
- return -EPROBE_DEFER;
- }
- return 0;
-}
-
-static int clcdfb_of_get_mode(struct device *dev, struct device_node *panel,
- struct clcd_panel *clcd_panel)
-{
- int err;
- struct fb_videomode *mode;
- char *name;
- int len;
-
- /* Only directly connected DPI panels supported for now */
- if (of_device_is_compatible(panel, "panel-dpi"))
- err = clcdfb_of_get_dpi_panel_mode(panel, clcd_panel);
- else
- err = -ENOENT;
- if (err)
- return err;
- mode = &clcd_panel->mode;
-
- len = clcdfb_snprintf_mode(NULL, 0, mode);
- name = devm_kzalloc(dev, len + 1, GFP_KERNEL);
- if (!name)
- return -ENOMEM;
-
- clcdfb_snprintf_mode(name, len + 1, mode);
- mode->name = name;
-
- return 0;
-}
-
-static int clcdfb_of_init_tft_panel(struct clcd_fb *fb, u32 r0, u32 g0, u32 b0)
-{
- static struct {
- unsigned int part;
- u32 r0, g0, b0;
- u32 caps;
- } panels[] = {
- { 0x110, 1, 7, 13, CLCD_CAP_5551 },
- { 0x110, 0, 8, 16, CLCD_CAP_888 },
- { 0x110, 16, 8, 0, CLCD_CAP_888 },
- { 0x111, 4, 14, 20, CLCD_CAP_444 },
- { 0x111, 3, 11, 19, CLCD_CAP_444 | CLCD_CAP_5551 },
- { 0x111, 3, 10, 19, CLCD_CAP_444 | CLCD_CAP_5551 |
- CLCD_CAP_565 },
- { 0x111, 0, 8, 16, CLCD_CAP_444 | CLCD_CAP_5551 |
- CLCD_CAP_565 | CLCD_CAP_888 },
- };
- int i;
-
- /* Bypass pixel clock divider */
- fb->panel->tim2 |= TIM2_BCD;
-
- /* TFT display, vert. comp. interrupt at the start of the back porch */
- fb->panel->cntl |= CNTL_LCDTFT | CNTL_LCDVCOMP(1);
-
- fb->panel->caps = 0;
-
- /* Match the setup with known variants */
- for (i = 0; i < ARRAY_SIZE(panels) && !fb->panel->caps; i++) {
- if (amba_part(fb->dev) != panels[i].part)
- continue;
- if (g0 != panels[i].g0)
- continue;
- if (r0 == panels[i].r0 && b0 == panels[i].b0)
- fb->panel->caps = panels[i].caps;
- }
-
- /*
- * If we actually physically connected the R lines to B and
- * vice versa
- */
- if (r0 != 0 && b0 == 0)
- fb->panel->bgr_connection = true;
-
- return fb->panel->caps ? 0 : -EINVAL;
-}
-
-static int clcdfb_of_init_display(struct clcd_fb *fb)
-{
- struct device_node *endpoint, *panel;
- int err;
- unsigned int bpp;
- u32 max_bandwidth;
- u32 tft_r0b0g0[3];
-
- fb->panel = devm_kzalloc(&fb->dev->dev, sizeof(*fb->panel), GFP_KERNEL);
- if (!fb->panel)
- return -ENOMEM;
-
- /*
- * Fetch the panel endpoint.
- */
- endpoint = of_graph_get_next_endpoint(fb->dev->dev.of_node, NULL);
- if (!endpoint)
- return -ENODEV;
-
- panel = of_graph_get_remote_port_parent(endpoint);
- if (!panel)
- return -ENODEV;
-
- err = clcdfb_of_get_backlight(panel, fb->panel);
- if (err)
- return err;
-
- err = clcdfb_of_get_mode(&fb->dev->dev, panel, fb->panel);
- if (err)
- return err;
-
- err = of_property_read_u32(fb->dev->dev.of_node, "max-memory-bandwidth",
- &max_bandwidth);
- if (!err) {
- /*
- * max_bandwidth is in bytes per second and pixclock in
- * pico-seconds, so the maximum allowed bits per pixel is
- * 8 * max_bandwidth / (PICOS2KHZ(pixclock) * 1000)
- * Rearrange this calculation to avoid overflow and then ensure
- * result is a valid format.
- */
- bpp = max_bandwidth / (1000 / 8)
- / PICOS2KHZ(fb->panel->mode.pixclock);
- bpp = rounddown_pow_of_two(bpp);
- if (bpp > 32)
- bpp = 32;
- } else
- bpp = 32;
- fb->panel->bpp = bpp;
-
-#ifdef CONFIG_CPU_BIG_ENDIAN
- fb->panel->cntl |= CNTL_BEBO;
-#endif
- fb->panel->width = -1;
- fb->panel->height = -1;
-
- if (of_property_read_u32_array(endpoint,
- "arm,pl11x,tft-r0g0b0-pads",
- tft_r0b0g0, ARRAY_SIZE(tft_r0b0g0)) != 0)
- return -ENOENT;
-
- return clcdfb_of_init_tft_panel(fb, tft_r0b0g0[0],
- tft_r0b0g0[1], tft_r0b0g0[2]);
-}
-
-static int clcdfb_of_vram_setup(struct clcd_fb *fb)
-{
- int err;
- struct device_node *memory;
- u64 size;
-
- err = clcdfb_of_init_display(fb);
- if (err)
- return err;
-
- memory = of_parse_phandle(fb->dev->dev.of_node, "memory-region", 0);
- if (!memory)
- return -ENODEV;
-
- fb->fb.screen_base = of_iomap(memory, 0);
- if (!fb->fb.screen_base)
- return -ENOMEM;
-
- fb->fb.fix.smem_start = of_translate_address(memory,
- of_get_address(memory, 0, &size, NULL));
- fb->fb.fix.smem_len = size;
-
- return 0;
-}
-
-static int clcdfb_of_vram_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
-{
- unsigned long off, user_size, kernel_size;
-
-
- off = vma->vm_pgoff << PAGE_SHIFT;
- user_size = vma->vm_end - vma->vm_start;
- kernel_size = fb->fb.fix.smem_len;
-
- if (off >= kernel_size || user_size > (kernel_size - off))
- return -ENXIO;
-
- return remap_pfn_range(vma, vma->vm_start,
- __phys_to_pfn(fb->fb.fix.smem_start) + vma->vm_pgoff,
- user_size,
- pgprot_writecombine(vma->vm_page_prot));
-}
-
-static void clcdfb_of_vram_remove(struct clcd_fb *fb)
-{
- iounmap(fb->fb.screen_base);
-}
-
-static int clcdfb_of_dma_setup(struct clcd_fb *fb)
-{
- unsigned long framesize;
- dma_addr_t dma;
- int err;
-
- err = clcdfb_of_init_display(fb);
- if (err)
- return err;
-
- framesize = PAGE_ALIGN(fb->panel->mode.xres * fb->panel->mode.yres *
- fb->panel->bpp / 8);
- fb->fb.screen_base = dma_alloc_coherent(&fb->dev->dev, framesize,
- &dma, GFP_KERNEL);
- if (!fb->fb.screen_base)
- return -ENOMEM;
-
- fb->fb.fix.smem_start = dma;
- fb->fb.fix.smem_len = framesize;
-
- return 0;
-}
-
-static int clcdfb_of_dma_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
-{
- return dma_mmap_wc(&fb->dev->dev, vma, fb->fb.screen_base,
- fb->fb.fix.smem_start, fb->fb.fix.smem_len);
-}
-
-static void clcdfb_of_dma_remove(struct clcd_fb *fb)
-{
- dma_free_coherent(&fb->dev->dev, fb->fb.fix.smem_len,
- fb->fb.screen_base, fb->fb.fix.smem_start);
-}
-
-static struct clcd_board *clcdfb_of_get_board(struct amba_device *dev)
-{
- struct clcd_board *board = devm_kzalloc(&dev->dev, sizeof(*board),
- GFP_KERNEL);
- struct device_node *node = dev->dev.of_node;
-
- if (!board)
- return NULL;
-
- board->name = of_node_full_name(node);
- board->caps = CLCD_CAP_ALL;
- board->check = clcdfb_check;
- board->decode = clcdfb_decode;
- if (of_find_property(node, "memory-region", NULL)) {
- board->setup = clcdfb_of_vram_setup;
- board->mmap = clcdfb_of_vram_mmap;
- board->remove = clcdfb_of_vram_remove;
- } else {
- board->setup = clcdfb_of_dma_setup;
- board->mmap = clcdfb_of_dma_mmap;
- board->remove = clcdfb_of_dma_remove;
- }
-
- return board;
-}
-#else
-static struct clcd_board *clcdfb_of_get_board(struct amba_device *dev)
-{
- return NULL;
-}
-#endif
-
-static int clcdfb_probe(struct amba_device *dev, const struct amba_id *id)
-{
- struct clcd_board *board = dev_get_platdata(&dev->dev);
- struct clcd_fb *fb;
- int ret;
-
- if (!board)
- board = clcdfb_of_get_board(dev);
-
- if (!board)
- return -EINVAL;
-
- ret = dma_set_mask_and_coherent(&dev->dev, DMA_BIT_MASK(32));
- if (ret)
- goto out;
-
- ret = amba_request_regions(dev, NULL);
- if (ret) {
- printk(KERN_ERR "CLCD: unable to reserve regs region\n");
- goto out;
- }
-
- fb = kzalloc(sizeof(*fb), GFP_KERNEL);
- if (!fb) {
- ret = -ENOMEM;
- goto free_region;
- }
-
- fb->dev = dev;
- fb->board = board;
-
- dev_info(&fb->dev->dev, "PL%03x designer %02x rev%u at 0x%08llx\n",
- amba_part(dev), amba_manf(dev), amba_rev(dev),
- (unsigned long long)dev->res.start);
-
- ret = fb->board->setup(fb);
- if (ret)
- goto free_fb;
-
- ret = clcdfb_register(fb);
- if (ret == 0) {
- amba_set_drvdata(dev, fb);
- goto out;
- }
-
- fb->board->remove(fb);
- free_fb:
- kfree(fb);
- free_region:
- amba_release_regions(dev);
- out:
- return ret;
-}
-
-static int clcdfb_remove(struct amba_device *dev)
-{
- struct clcd_fb *fb = amba_get_drvdata(dev);
-
- clcdfb_disable(fb);
- unregister_framebuffer(&fb->fb);
- if (fb->fb.cmap.len)
- fb_dealloc_cmap(&fb->fb.cmap);
- iounmap(fb->regs);
- clk_unprepare(fb->clk);
- clk_put(fb->clk);
-
- fb->board->remove(fb);
-
- kfree(fb);
-
- amba_release_regions(dev);
-
- return 0;
-}
-
-static const struct amba_id clcdfb_id_table[] = {
- {
- .id = 0x00041110,
- .mask = 0x000ffffe,
- },
- { 0, 0 },
-};
-
-MODULE_DEVICE_TABLE(amba, clcdfb_id_table);
-
-static struct amba_driver clcd_driver = {
- .drv = {
- .name = "clcd-pl11x",
- },
- .probe = clcdfb_probe,
- .remove = clcdfb_remove,
- .id_table = clcdfb_id_table,
-};
-
-static int __init amba_clcdfb_init(void)
-{
- if (fb_get_options("ambafb", NULL))
- return -ENODEV;
-
- return amba_driver_register(&clcd_driver);
-}
-
-module_init(amba_clcdfb_init);
-
-static void __exit amba_clcdfb_exit(void)
-{
- amba_driver_unregister(&clcd_driver);
-}
-
-module_exit(amba_clcdfb_exit);
-
-MODULE_DESCRIPTION("ARM PrimeCell PL110 CLCD core driver");
-MODULE_LICENSE("GPL");
diff --git a/include/linux/amba/clcd.h b/include/linux/amba/clcd.h
deleted file mode 100644
index b6e0cbeaf533..000000000000
--- a/include/linux/amba/clcd.h
+++ /dev/null
@@ -1,290 +0,0 @@
-/*
- * linux/include/asm-arm/hardware/amba_clcd.h -- Integrator LCD panel.
- *
- * David A Rusling
- *
- * Copyright (C) 2001 ARM Limited
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive
- * for more details.
- */
-#include <linux/fb.h>
-#include <linux/amba/clcd-regs.h>
-
-enum {
- /* individual formats */
- CLCD_CAP_RGB444 = (1 << 0),
- CLCD_CAP_RGB5551 = (1 << 1),
- CLCD_CAP_RGB565 = (1 << 2),
- CLCD_CAP_RGB888 = (1 << 3),
- CLCD_CAP_BGR444 = (1 << 4),
- CLCD_CAP_BGR5551 = (1 << 5),
- CLCD_CAP_BGR565 = (1 << 6),
- CLCD_CAP_BGR888 = (1 << 7),
-
- /* connection layouts */
- CLCD_CAP_444 = CLCD_CAP_RGB444 | CLCD_CAP_BGR444,
- CLCD_CAP_5551 = CLCD_CAP_RGB5551 | CLCD_CAP_BGR5551,
- CLCD_CAP_565 = CLCD_CAP_RGB565 | CLCD_CAP_BGR565,
- CLCD_CAP_888 = CLCD_CAP_RGB888 | CLCD_CAP_BGR888,
-
- /* red/blue ordering */
- CLCD_CAP_RGB = CLCD_CAP_RGB444 | CLCD_CAP_RGB5551 |
- CLCD_CAP_RGB565 | CLCD_CAP_RGB888,
- CLCD_CAP_BGR = CLCD_CAP_BGR444 | CLCD_CAP_BGR5551 |
- CLCD_CAP_BGR565 | CLCD_CAP_BGR888,
-
- CLCD_CAP_ALL = CLCD_CAP_BGR | CLCD_CAP_RGB,
-};
-
-struct backlight_device;
-
-struct clcd_panel {
- struct fb_videomode mode;
- signed short width; /* width in mm */
- signed short height; /* height in mm */
- u32 tim2;
- u32 tim3;
- u32 cntl;
- u32 caps;
- unsigned int bpp:8,
- fixedtimings:1,
- grayscale:1;
- unsigned int connector;
- struct backlight_device *backlight;
- /*
- * If the B/R lines are switched between the CLCD
- * and the panel we need to know this and not try to
- * compensate with the BGR bit in the control register.
- */
- bool bgr_connection;
-};
-
-struct clcd_regs {
- u32 tim0;
- u32 tim1;
- u32 tim2;
- u32 tim3;
- u32 cntl;
- unsigned long pixclock;
-};
-
-struct clcd_fb;
-
-/*
- * the board-type specific routines
- */
-struct clcd_board {
- const char *name;
-
- /*
- * Optional. Hardware capability flags.
- */
- u32 caps;
-
- /*
- * Optional. Check whether the var structure is acceptable
- * for this display.
- */
- int (*check)(struct clcd_fb *fb, struct fb_var_screeninfo *var);
-
- /*
- * Compulsory. Decode fb->fb.var into regs->*. In the case of
- * fixed timing, set regs->* to the register values required.
- */
- void (*decode)(struct clcd_fb *fb, struct clcd_regs *regs);
-
- /*
- * Optional. Disable any extra display hardware.
- */
- void (*disable)(struct clcd_fb *);
-
- /*
- * Optional. Enable any extra display hardware.
- */
- void (*enable)(struct clcd_fb *);
-
- /*
- * Setup platform specific parts of CLCD driver
- */
- int (*setup)(struct clcd_fb *);
-
- /*
- * mmap the framebuffer memory
- */
- int (*mmap)(struct clcd_fb *, struct vm_area_struct *);
-
- /*
- * Remove platform specific parts of CLCD driver
- */
- void (*remove)(struct clcd_fb *);
-};
-
-struct amba_device;
-struct clk;
-
-/* this data structure describes each frame buffer device we find */
-struct clcd_fb {
- struct fb_info fb;
- struct amba_device *dev;
- struct clk *clk;
- struct clcd_panel *panel;
- struct clcd_board *board;
- void *board_data;
- void __iomem *regs;
- u16 off_ienb;
- u16 off_cntl;
- u32 clcd_cntl;
- u32 cmap[16];
- bool clk_enabled;
-};
-
-static inline void clcdfb_decode(struct clcd_fb *fb, struct clcd_regs *regs)
-{
- struct fb_var_screeninfo *var = &fb->fb.var;
- u32 val, cpl;
-
- /*
- * Program the CLCD controller registers and start the CLCD
- */
- val = ((var->xres / 16) - 1) << 2;
- val |= (var->hsync_len - 1) << 8;
- val |= (var->right_margin - 1) << 16;
- val |= (var->left_margin - 1) << 24;
- regs->tim0 = val;
-
- val = var->yres;
- if (fb->panel->cntl & CNTL_LCDDUAL)
- val /= 2;
- val -= 1;
- val |= (var->vsync_len - 1) << 10;
- val |= var->lower_margin << 16;
- val |= var->upper_margin << 24;
- regs->tim1 = val;
-
- val = fb->panel->tim2;
- val |= var->sync & FB_SYNC_HOR_HIGH_ACT ? 0 : TIM2_IHS;
- val |= var->sync & FB_SYNC_VERT_HIGH_ACT ? 0 : TIM2_IVS;
-
- cpl = var->xres_virtual;
- if (fb->panel->cntl & CNTL_LCDTFT) /* TFT */
- /* / 1 */;
- else if (!var->grayscale) /* STN color */
- cpl = cpl * 8 / 3;
- else if (fb->panel->cntl & CNTL_LCDMONO8) /* STN monochrome, 8bit */
- cpl /= 8;
- else /* STN monochrome, 4bit */
- cpl /= 4;
-
- regs->tim2 = val | ((cpl - 1) << 16);
-
- regs->tim3 = fb->panel->tim3;
-
- val = fb->panel->cntl;
- if (var->grayscale)
- val |= CNTL_LCDBW;
-
- if (fb->panel->caps && fb->board->caps && var->bits_per_pixel >= 16) {
- /*
- * if board and panel supply capabilities, we can support
- * changing BGR/RGB depending on supplied parameters. Here
- * we switch to what the framebuffer is providing if need
- * be, so if the framebuffer is BGR but the display connection
- * is RGB (first case) we switch it around. Vice versa mutatis
- * mutandis if the framebuffer is RGB but the display connection
- * is BGR, we flip it around.
- */
- if (var->red.offset == 0)
- val &= ~CNTL_BGR;
- else
- val |= CNTL_BGR;
- if (fb->panel->bgr_connection)
- val ^= CNTL_BGR;
- }
-
- switch (var->bits_per_pixel) {
- case 1:
- val |= CNTL_LCDBPP1;
- break;
- case 2:
- val |= CNTL_LCDBPP2;
- break;
- case 4:
- val |= CNTL_LCDBPP4;
- break;
- case 8:
- val |= CNTL_LCDBPP8;
- break;
- case 16:
- /*
- * PL110 cannot choose between 5551 and 565 modes in its
- * control register. It is possible to use 565 with
- * custom external wiring.
- */
- if (amba_part(fb->dev) == 0x110 ||
- var->green.length == 5)
- val |= CNTL_LCDBPP16;
- else if (var->green.length == 6)
- val |= CNTL_LCDBPP16_565;
- else
- val |= CNTL_LCDBPP16_444;
- break;
- case 32:
- val |= CNTL_LCDBPP24;
- break;
- }
-
- regs->cntl = val;
- regs->pixclock = var->pixclock;
-}
-
-static inline int clcdfb_check(struct clcd_fb *fb, struct fb_var_screeninfo
*var)
-{
- var->xres_virtual = var->xres = (var->xres + 15) & ~15;
- var->yres_virtual = var->yres = (var->yres + 1) & ~1;
-
-#define CHECK(e,l,h) (var->e < l || var->e > h)
- if (CHECK(right_margin, (5+1), 256) || /* back porch */
- CHECK(left_margin, (5+1), 256) || /* front porch */
- CHECK(hsync_len, (5+1), 256) ||
- var->xres > 4096 ||
- var->lower_margin > 255 || /* back porch */
- var->upper_margin > 255 || /* front porch */
- var->vsync_len > 32 ||
- var->yres > 1024)
- return -EINVAL;
-#undef CHECK
-
- /* single panel mode: PCD = max(PCD, 1) */
- /* dual panel mode: PCD = max(PCD, 5) */
-
- /*
- * You can't change the grayscale setting, and
- * we can only do non-interlaced video.
- */
- if (var->grayscale != fb->fb.var.grayscale ||
- (var->vmode & FB_VMODE_MASK) != FB_VMODE_NONINTERLACED)
- return -EINVAL;
-
-#define CHECK(e) (var->e != fb->fb.var.e)
- if (fb->panel->fixedtimings &&
- (CHECK(xres) ||
- CHECK(yres) ||
- CHECK(bits_per_pixel) ||
- CHECK(pixclock) ||
- CHECK(left_margin) ||
- CHECK(right_margin) ||
- CHECK(upper_margin) ||
- CHECK(lower_margin) ||
- CHECK(hsync_len) ||
- CHECK(vsync_len) ||
- CHECK(sync)))
- return -EINVAL;
-#undef CHECK
-
- var->nonstd = 0;
- var->accel_flags = 0;
-
- return 0;
-}
--
2.25.4
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
