Link status is different from display connected status in the case
of something like an Apple dongle where the type-c plug can be
connected, and therefore the link is connected, but no sink is
connected until an HDMI cable is plugged into the dongle.
The sink_count of DPCD of dongle will increase to 1 once an HDMI
cable is plugged into the dongle so that display connected status
will become true. This checking also apply at pm_resume.

Fixes: 94e58e2d06e3 ("drm/msm/dp: reset dp controller only at boot up and 
pm_resume")
Reported-by: Stephen Boyd <swb...@chromium.org>
Reviewed-by: Stephen Boyd <swb...@chromium.org>
Tested-by: Stephen Boyd <swb...@chromium.org>
Signed-off-by: Kuogee Hsieh <khs...@codeaurora.org>
---
 drivers/gpu/drm/msm/dp/dp_display.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/msm/dp/dp_display.c 
b/drivers/gpu/drm/msm/dp/dp_display.c
index 5a39da6..0ba71c7 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -586,10 +586,8 @@ static int dp_connect_pending_timeout(struct 
dp_display_private *dp, u32 data)
        mutex_lock(&dp->event_mutex);
 
        state = dp->hpd_state;
-       if (state == ST_CONNECT_PENDING) {
-               dp_display_enable(dp, 0);
+       if (state == ST_CONNECT_PENDING)
                dp->hpd_state = ST_CONNECTED;
-       }
 
        mutex_unlock(&dp->event_mutex);
 
@@ -669,10 +667,8 @@ static int dp_disconnect_pending_timeout(struct 
dp_display_private *dp, u32 data
        mutex_lock(&dp->event_mutex);
 
        state =  dp->hpd_state;
-       if (state == ST_DISCONNECT_PENDING) {
-               dp_display_disable(dp, 0);
+       if (state == ST_DISCONNECT_PENDING)
                dp->hpd_state = ST_DISCONNECTED;
-       }
 
        mutex_unlock(&dp->event_mutex);
 
@@ -1272,7 +1268,12 @@ static int dp_pm_resume(struct device *dev)
 
        status = dp_catalog_link_is_connected(dp->catalog);
 
-       if (status)
+       /*
+        * can not declared display is connected unless
+        * HDMI cable is plugged in and sink_count of
+        * dongle become 1
+        */
+       if (status && dp->link->sink_count)
                dp->dp_display.is_connected = true;
        else
                dp->dp_display.is_connected = false;
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Reply via email to