Hi Yunfei,

thanks for you work, see comments below...

Le samedi 22 janvier 2022 à 11:53 +0800, Yunfei Dong a écrit :
> For lat and core decode in parallel, need to get capture buffer
> when core start to decode and put capture buffer to display
> list when core decode done.
> 
> Signed-off-by: Yunfei Dong <[email protected]>
> ---
>  .../mtk-vcodec/mtk_vcodec_dec_stateless.c     | 121 ++++++++++++------
>  .../platform/mtk-vcodec/mtk_vcodec_drv.h      |   5 +-
>  .../mtk-vcodec/vdec/vdec_h264_req_if.c        |  16 ++-
>  3 files changed, 102 insertions(+), 40 deletions(-)
> 
> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateless.c 
> b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateless.c
> index 23a154c4e321..6d481410bf89 100644
> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateless.c
> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateless.c
> @@ -108,37 +108,87 @@ static const struct mtk_codec_framesizes 
> mtk_vdec_framesizes[] = {
>  
>  #define NUM_SUPPORTED_FRAMESIZE ARRAY_SIZE(mtk_vdec_framesizes)
>  
> -static void mtk_vdec_stateless_set_dst_payload(struct mtk_vcodec_ctx *ctx,
> -                                            struct vdec_fb *fb)
> +static void mtk_vdec_stateless_out_to_done(struct mtk_vcodec_ctx *ctx,
> +                                        struct mtk_vcodec_mem *bs, int error)
>  {
> -     struct mtk_video_dec_buf *vdec_frame_buf =
> -             container_of(fb, struct mtk_video_dec_buf, frame_buffer);
> -     struct vb2_v4l2_buffer *vb = &vdec_frame_buf->m2m_buf.vb;
> -     unsigned int cap_y_size = ctx->q_data[MTK_Q_DATA_DST].sizeimage[0];
> +     struct mtk_video_dec_buf *out_buf;
> +     struct vb2_v4l2_buffer *vb;
>  
> -     vb2_set_plane_payload(&vb->vb2_buf, 0, cap_y_size);
> -     if (ctx->q_data[MTK_Q_DATA_DST].fmt->num_planes == 2) {
> -             unsigned int cap_c_size =
> -                     ctx->q_data[MTK_Q_DATA_DST].sizeimage[1];
> +     if (!bs) {
> +             mtk_v4l2_err("Free bitstream buffer fail.");
> +             return;
> +     }
> +     out_buf = container_of(bs, struct mtk_video_dec_buf, bs_buffer);
> +     vb = &out_buf->m2m_buf.vb;
>  
> -             vb2_set_plane_payload(&vb->vb2_buf, 1, cap_c_size);
> +     mtk_v4l2_debug(2, "Free bitsteam buffer id = %d to done_list",
> +                    vb->vb2_buf.index);
> +
> +     v4l2_m2m_src_buf_remove(ctx->m2m_ctx);
> +     if (error) {
> +             v4l2_m2m_buf_done(vb, VB2_BUF_STATE_ERROR);
> +             if (error == -EIO)
> +                     out_buf->error = true;
> +     } else {
> +             v4l2_m2m_buf_done(vb, VB2_BUF_STATE_DONE);
>       }
>  }
>  
> -static struct vdec_fb *vdec_get_cap_buffer(struct mtk_vcodec_ctx *ctx,
> -                                        struct vb2_v4l2_buffer *vb2_v4l2)
> +static void mtk_vdec_stateless_cap_to_disp(struct mtk_vcodec_ctx *ctx,
> +                                        struct vdec_fb *fb, int error)
>  {
> -     struct mtk_video_dec_buf *framebuf =
> -             container_of(vb2_v4l2, struct mtk_video_dec_buf, m2m_buf.vb);
> -     struct vdec_fb *pfb = &framebuf->frame_buffer;
> -     struct vb2_buffer *dst_buf = &vb2_v4l2->vb2_buf;
> +     struct mtk_video_dec_buf *vdec_frame_buf;
> +     struct vb2_v4l2_buffer *vb;
> +     unsigned int cap_y_size, cap_c_size;
> +
> +     if (!fb) {
> +             mtk_v4l2_err("Free frame buffer fail.");
> +             return;
> +     }
> +     vdec_frame_buf = container_of(fb, struct mtk_video_dec_buf,
> +                                   frame_buffer);
> +     vb = &vdec_frame_buf->m2m_buf.vb;
> +
> +     cap_y_size = ctx->q_data[MTK_Q_DATA_DST].sizeimage[0];
> +     cap_c_size = ctx->q_data[MTK_Q_DATA_DST].sizeimage[1];
> +
> +     v4l2_m2m_dst_buf_remove(ctx->m2m_ctx);
>  
> -     pfb->base_y.va = NULL;
> +     vb2_set_plane_payload(&vb->vb2_buf, 0, cap_y_size);
> +     if (ctx->q_data[MTK_Q_DATA_DST].fmt->num_planes == 2)
> +             vb2_set_plane_payload(&vb->vb2_buf, 1, cap_c_size);
> +
> +     mtk_v4l2_debug(2, "Free frame buffer id = %d to done_list",
> +                    vb->vb2_buf.index);
> +     if (error)
> +             v4l2_m2m_buf_done(vb, VB2_BUF_STATE_ERROR);
> +     else
> +             v4l2_m2m_buf_done(vb, VB2_BUF_STATE_DONE);
> +}
> +
> +static struct vdec_fb *vdec_get_cap_buffer(struct mtk_vcodec_ctx *ctx)
> +{
> +     struct mtk_video_dec_buf *framebuf;
> +     struct vb2_v4l2_buffer *vb2_v4l2;
> +     struct vb2_buffer *dst_buf;
> +     struct vdec_fb *pfb;
> +
> +     vb2_v4l2 = v4l2_m2m_next_dst_buf(ctx->m2m_ctx);
> +     if (!vb2_v4l2) {
> +             mtk_v4l2_debug(1, "[%d] dst_buf empty!!", ctx->id);
> +             return NULL;
> +     }
> +
> +     dst_buf = &vb2_v4l2->vb2_buf;
> +     framebuf = container_of(vb2_v4l2, struct mtk_video_dec_buf, m2m_buf.vb);
> +
> +     pfb = &framebuf->frame_buffer;
> +     pfb->base_y.va = vb2_plane_vaddr(dst_buf, 0);
>       pfb->base_y.dma_addr = vb2_dma_contig_plane_dma_addr(dst_buf, 0);
>       pfb->base_y.size = ctx->q_data[MTK_Q_DATA_DST].sizeimage[0];
>  
>       if (ctx->q_data[MTK_Q_DATA_DST].fmt->num_planes == 2) {
> -             pfb->base_c.va = NULL;
> +             pfb->base_c.va = vb2_plane_vaddr(dst_buf, 1);
>               pfb->base_c.dma_addr =
>                       vb2_dma_contig_plane_dma_addr(dst_buf, 1);
>               pfb->base_c.size = ctx->q_data[MTK_Q_DATA_DST].sizeimage[1];
> @@ -162,12 +212,11 @@ static void mtk_vdec_worker(struct work_struct *work)
>       struct mtk_vcodec_ctx *ctx =
>               container_of(work, struct mtk_vcodec_ctx, decode_work);
>       struct mtk_vcodec_dev *dev = ctx->dev;
> -     struct vb2_v4l2_buffer *vb2_v4l2_src, *vb2_v4l2_dst;
> +     struct vb2_v4l2_buffer *vb2_v4l2_src;
>       struct vb2_buffer *vb2_src;
>       struct mtk_vcodec_mem *bs_src;
>       struct mtk_video_dec_buf *dec_buf_src;
>       struct media_request *src_buf_req;
> -     struct vdec_fb *dst_buf;
>       bool res_chg = false;
>       int ret;
>  
> @@ -178,13 +227,6 @@ static void mtk_vdec_worker(struct work_struct *work)
>               return;
>       }
>  
> -     vb2_v4l2_dst = v4l2_m2m_next_dst_buf(ctx->m2m_ctx);
> -     if (!vb2_v4l2_dst) {
> -             v4l2_m2m_job_finish(dev->m2m_dev_dec, ctx->m2m_ctx);
> -             mtk_v4l2_debug(1, "[%d] no available destination buffer", 
> ctx->id);
> -             return;
> -     }
> -
>       vb2_src = &vb2_v4l2_src->vb2_buf;
>       dec_buf_src = container_of(vb2_v4l2_src, struct mtk_video_dec_buf,
>                                  m2m_buf.vb);
> @@ -193,9 +235,15 @@ static void mtk_vdec_worker(struct work_struct *work)
>       mtk_v4l2_debug(3, "[%d] (%d) id=%d, vb=%p", ctx->id,
>                      vb2_src->vb2_queue->type, vb2_src->index, vb2_src);
>  
> -     bs_src->va = NULL;
> +     bs_src->va = vb2_plane_vaddr(vb2_src, 0);
>       bs_src->dma_addr = vb2_dma_contig_plane_dma_addr(vb2_src, 0);
>       bs_src->size = (size_t)vb2_src->planes[0].bytesused;
> +     if (!bs_src->va) {
> +             v4l2_m2m_job_finish(dev->m2m_dev_dec, ctx->m2m_ctx);
> +             mtk_v4l2_err("[%d] id=%d source buffer is NULL", ctx->id,
> +                          vb2_src->index);
> +             return;
> +     }
>  
>       mtk_v4l2_debug(3, "[%d] Bitstream VA=%p DMA=%pad Size=%zx vb=%p",
>                      ctx->id, bs_src->va, &bs_src->dma_addr, bs_src->size, 
> vb2_src);
> @@ -206,9 +254,7 @@ static void mtk_vdec_worker(struct work_struct *work)
>       else
>               mtk_v4l2_err("vb2 buffer media request is NULL");
>  
> -     dst_buf = vdec_get_cap_buffer(ctx, vb2_v4l2_dst);
> -     v4l2_m2m_buf_copy_metadata(vb2_v4l2_src, vb2_v4l2_dst, true);

Please keep using this helper, it is specially crafted to ease maintenance.

> -     ret = vdec_if_decode(ctx, bs_src, dst_buf, &res_chg);
> +     ret = vdec_if_decode(ctx, bs_src, NULL, &res_chg);
>       if (ret) {
>               mtk_v4l2_err(" <===[%d], src_buf[%d] sz=0x%zx pts=%llu 
> vdec_if_decode() ret=%d res_chg=%d===>",
>                            ctx->id, vb2_src->index, bs_src->size,
> @@ -220,12 +266,9 @@ static void mtk_vdec_worker(struct work_struct *work)
>               }
>       }
>  
> -     mtk_vdec_stateless_set_dst_payload(ctx, dst_buf);
> -
> -     v4l2_m2m_buf_done_and_job_finish(dev->m2m_dev_dec, ctx->m2m_ctx,
> -                                      ret ? VB2_BUF_STATE_ERROR : 
> VB2_BUF_STATE_DONE);
> -
> +     mtk_vdec_stateless_out_to_done(ctx, bs_src, ret);

v4l2_m2m_buf_done_and_job_finish() was specially crafted to prevent developer
from implementing the signalling of the request at the wrong moment. This patch
broke this strict ordering. The relevant comment in the helper function:


        /*
         * If the request API is being used, returning the OUTPUT
         * (src) buffer will wake-up any process waiting on the
         * request file descriptor.
         *
         * Therefore, return the CAPTURE (dst) buffer first,
         * to avoid signalling the request file descriptor
         * before the CAPTURE buffer is done.
         */

In short, as request signalling is bound to the src buffer, with this change you
signal the request too early, which may lead userland to think it can DQ the
capture buffer. I see exactly that happening when running with GStreamer, which
strictly rely on the request polling. Please keep using
v4l2_m2m_buf_done_and_job_finish(), and move it into
mtk_vdec_stateless_cap_to_disp(). 


>       v4l2_ctrl_request_complete(src_buf_req, &ctx->ctrl_hdl);
> +     v4l2_m2m_job_finish(dev->m2m_dev_dec, ctx->m2m_ctx);
>  }
>  
>  static void vb2ops_vdec_stateless_buf_queue(struct vb2_buffer *vb)
> @@ -358,6 +401,8 @@ const struct mtk_vcodec_dec_pdata mtk_vdec_8183_pdata = {
>       .uses_stateless_api = true,
>       .worker = mtk_vdec_worker,
>       .flush_decoder = mtk_vdec_flush_decoder,
> +     .cap_to_disp = mtk_vdec_stateless_cap_to_disp,
> +     .get_cap_buffer = vdec_get_cap_buffer,
>       .is_subdev_supported = false,
>       .hw_arch = MTK_VDEC_PURE_SINGLE_CORE,
>  };
> @@ -376,6 +421,8 @@ const struct mtk_vcodec_dec_pdata mtk_lat_sig_core_pdata 
> = {
>       .uses_stateless_api = true,
>       .worker = mtk_vdec_worker,
>       .flush_decoder = mtk_vdec_flush_decoder,
> +     .cap_to_disp = mtk_vdec_stateless_cap_to_disp,
> +     .get_cap_buffer = vdec_get_cap_buffer,
>       .is_subdev_supported = true,
>       .hw_arch = MTK_VDEC_LAT_SINGLE_CORE,
>  };
> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h 
> b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
> index 2d1d878692ca..e0b7d2fda632 100644
> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
> @@ -353,7 +353,8 @@ enum mtk_vdec_hw_arch {
>   * @ctrls_setup: init vcodec dec ctrls
>   * @worker: worker to start a decode job
>   * @flush_decoder: function that flushes the decoder
> - *
> + * @get_cap_buffer: get capture buffer from capture queue
> + * @cap_to_disp: put capture buffer to disp list
>   * @vdec_vb2_ops: struct vb2_ops
>   *
>   * @vdec_formats: supported video decoder formats
> @@ -375,6 +376,8 @@ struct mtk_vcodec_dec_pdata {
>       int (*ctrls_setup)(struct mtk_vcodec_ctx *ctx);
>       void (*worker)(struct work_struct *work);
>       int (*flush_decoder)(struct mtk_vcodec_ctx *ctx);
> +     struct vdec_fb *(*get_cap_buffer)(struct mtk_vcodec_ctx *ctx);
> +     void (*cap_to_disp)(struct mtk_vcodec_ctx *ctx, struct vdec_fb *fb, int 
> error);
>  
>       struct vb2_ops *vdec_vb2_ops;
>  
> diff --git a/drivers/media/platform/mtk-vcodec/vdec/vdec_h264_req_if.c 
> b/drivers/media/platform/mtk-vcodec/vdec/vdec_h264_req_if.c
> index 43542de11e9c..36f3dc1fbe3b 100644
> --- a/drivers/media/platform/mtk-vcodec/vdec/vdec_h264_req_if.c
> +++ b/drivers/media/platform/mtk-vcodec/vdec/vdec_h264_req_if.c
> @@ -670,32 +670,42 @@ static void vdec_h264_slice_deinit(void *h_vdec)
>  }
>  
>  static int vdec_h264_slice_decode(void *h_vdec, struct mtk_vcodec_mem *bs,
> -                               struct vdec_fb *fb, bool *res_chg)
> +                               struct vdec_fb *unused, bool *res_chg)
>  {
>       struct vdec_h264_slice_inst *inst = h_vdec;
>       const struct v4l2_ctrl_h264_decode_params *dec_params =
>               get_ctrl_ptr(inst->ctx, V4L2_CID_STATELESS_H264_DECODE_PARAMS);
>       struct vdec_vpu_inst *vpu = &inst->vpu;
> +     struct mtk_video_dec_buf *src_buf_info;
> +     struct mtk_video_dec_buf *dst_buf_info;
> +     struct vdec_fb *fb;
>       u32 data[2];
>       u64 y_fb_dma;
>       u64 c_fb_dma;
>       int err;
>  
> +     inst->num_nalu++;
>       /* bs NULL means flush decoder */
>       if (!bs)
>               return vpu_dec_reset(vpu);
>  
> +     fb = inst->ctx->dev->vdec_pdata->get_cap_buffer(inst->ctx);
> +     src_buf_info = container_of(bs, struct mtk_video_dec_buf, bs_buffer);
> +     dst_buf_info = container_of(fb, struct mtk_video_dec_buf, frame_buffer);
> +
>       y_fb_dma = fb ? (u64)fb->base_y.dma_addr : 0;
>       c_fb_dma = fb ? (u64)fb->base_c.dma_addr : 0;
>  
>       mtk_vcodec_debug(inst, "+ [%d] FB y_dma=%llx c_dma=%llx va=%p",
> -                      ++inst->num_nalu, y_fb_dma, c_fb_dma, fb);
> +                      inst->num_nalu, y_fb_dma, c_fb_dma, fb);
>  
>       inst->vsi_ctx.dec.bs_dma = (uint64_t)bs->dma_addr;
>       inst->vsi_ctx.dec.y_fb_dma = y_fb_dma;
>       inst->vsi_ctx.dec.c_fb_dma = c_fb_dma;
>       inst->vsi_ctx.dec.vdec_fb_va = (u64)(uintptr_t)fb;
>  
> +     v4l2_m2m_buf_copy_metadata(&src_buf_info->m2m_buf.vb,
> +                                &dst_buf_info->m2m_buf.vb, true);
>       get_vdec_decode_parameters(inst);
>       data[0] = bs->size;
>       /*
> @@ -734,6 +744,8 @@ static int vdec_h264_slice_decode(void *h_vdec, struct 
> mtk_vcodec_mem *bs,
>  
>       memcpy(&inst->vsi_ctx, inst->vpu.vsi, sizeof(inst->vsi_ctx));
>       mtk_vcodec_debug(inst, "\n - NALU[%d]", inst->num_nalu);
> +
> +     inst->ctx->dev->vdec_pdata->cap_to_disp(inst->ctx, fb, 0);
>       return 0;
>  
>  err_free_fb_out:

Reply via email to