Currently, pkt_per_line is calculated by dividing slice_per_intf by
slice_count. This is incorrect, as slice_per_intf should be divided by
slice_per_pkt, which is not always equivalent to slice_count as it is
possible for there to be multiple soft slices per interface even though
a panel only specifies one slice per packet.
Fixes: 08802f515c3c ("drm/msm/dsi: Add support for DSC configuration")
Signed-off-by: Jessica Zhang <quic_jessz...@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.barysh...@linaro.org>
---
drivers/gpu/drm/msm/dsi/dsi_host.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c
b/drivers/gpu/drm/msm/dsi/dsi_host.c
index ae966d4e349d..43a5ec33eee8 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_host.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
@@ -862,7 +862,11 @@ static void dsi_update_dsc_timing(struct msm_dsi_host
*msm_host, bool is_cmd_mod
total_bytes_per_intf = msm_dsc_get_bytes_per_intf(dsc, hdisplay);
eol_byte_num = total_bytes_per_intf % 3;
- pkt_per_line = slice_per_intf / dsc->slice_count;
+
+ /* Default to 1 slice_per_pkt, so pkt_per_line will be equal to
+ * slice per intf.
+ */
+ pkt_per_line = slice_per_intf;
if (is_cmd_mode) /* packet data type */
reg =
DSI_COMMAND_COMPRESSION_MODE_CTRL_STREAM0_DATATYPE(MIPI_DSI_DCS_LONG_WRITE);
--
2.40.0
