On Sat, 3 Feb 2024 10:52:42 -0600
Adam Ford <aford...@gmail.com> wrote:
> From: Lucas Stach <l.st...@pengutronix.de>
>
> This adds the driver for the Samsung HDMI PHY found on the
> i.MX8MP SoC.
>
> Signed-off-by: Lucas Stach <l.st...@pengutronix.de>
> Signed-off-by: Adam Ford <aford...@gmail.com>
> Tested-by: Alexander Stein <alexander.st...@ew.tq-group.com>
[...]
> +#define PHY_REG_33 0x84
> +#define REG33_MODE_SET_DONE BIT(7)
> +#define REG33_FIX_DA BIT(1)
> +
> +#define PHY_REG_34 0x88
> +#define REG34_PHY_READY BIT(7)
> +#define REG34_PLL_LOCK BIT(6)
> +#define REG34_PHY_CLK_READY BIT(5)
> +
> +
Nitpick: only one empty line here.
> +#define PHY_PLL_REGS_NUM 48
[...]
> +static int phy_clk_register(struct fsl_samsung_hdmi_phy *phy)
> +{
> + struct device *dev = phy->dev;
> + struct device_node *np = dev->of_node;
> + struct clk_init_data init;
> + const char *parent_name;
> + struct clk *phyclk;
> + int ret;
> +
> + parent_name = __clk_get_name(phy->refclk);
> +
> + init.parent_names = &parent_name;
> + init.num_parents = 1;
> + init.flags = 0;
> + init.name = "hdmi_pclk";
> + init.ops = &phy_clk_ops;
> +
> + phy->hw.init = &init;
> +
> + phyclk = devm_clk_register(dev, &phy->hw);
> + if (IS_ERR(phyclk))
> + return dev_err_probe(dev, PTR_ERR(phyclk),
> + "failed to register clock\n");
> +
> + ret = of_clk_add_provider(np, of_clk_src_simple_get, phyclk);
Ouch:
> This function is *deprecated*. Use of_clk_add_hw_provider() instead.
Appears as an easy replacement though.
Otherwise looks good.
Luca
--
Luca Ceresoli, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
