Sorry, please ignore this patch.
At 2024-12-09 20:29:12, "Andy Yan" <andys...@163.com> wrote: >Enable hdmi display output on Cool Pi GenBook. > >Signed-off-by: Andy Yan <andys...@163.com> >Link: https://lore.kernel.org/r/20241028123503.384866-4-andys...@163.com >Signed-off-by: Heiko Stuebner <he...@sntech.de> >--- > .../rockchip/rk3588-coolpi-cm5-genbook.dts | 49 +++++++++++++++++++ > 1 file changed, 49 insertions(+) > >diff --git a/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-genbook.dts >b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-genbook.dts >index 6418286efe40d..9ec2374c6cdfa 100644 >--- a/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-genbook.dts >+++ b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-genbook.dts >@@ -7,6 +7,7 @@ > /dts-v1/; > > #include <dt-bindings/leds/common.h> >+#include <dt-bindings/soc/rockchip,vop2.h> > #include "rk3588-coolpi-cm5.dtsi" > > / { >@@ -35,6 +36,17 @@ charger: dc-charger { > gpios = <&gpio1 RK_PC0 GPIO_ACTIVE_LOW>; > }; > >+ hdmi-con { >+ compatible = "hdmi-connector"; >+ type = "a"; >+ >+ port { >+ hdmi_con_in: endpoint { >+ remote-endpoint = <&hdmi0_out_con>; >+ }; >+ }; >+ }; >+ > leds: leds { > compatible = "gpio-leds"; > >@@ -136,6 +148,28 @@ vcc5v0_usb_host0: vcc5v0_usb30_host: >vcc5v0-usb-host-regulator { > }; > }; > >+/* HDMI CEC is not used */ >+&hdmi0 { >+ pinctrl-0 = <&hdmim0_tx0_hpd &hdmim0_tx0_scl &hdmim0_tx0_sda>; >+ status = "okay"; >+}; >+ >+&hdmi0_in { >+ hdmi0_in_vp0: endpoint { >+ remote-endpoint = <&vp0_out_hdmi0>; >+ }; >+}; >+ >+&hdmi0_out { >+ hdmi0_out_con: endpoint { >+ remote-endpoint = <&hdmi_con_in>; >+ }; >+}; >+ >+&hdptxphy_hdmi0 { >+ status = "okay"; >+}; >+ > &i2c4 { > status = "okay"; > pinctrl-names = "default"; >@@ -347,3 +381,18 @@ &usb_host1_xhci { > dr_mode = "host"; > status = "okay"; > }; >+ >+&vop { >+ status = "okay"; >+}; >+ >+&vop_mmu { >+ status = "okay"; >+}; >+ >+&vp0 { >+ vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { >+ reg = <ROCKCHIP_VOP2_EP_HDMI0>; >+ remote-endpoint = <&hdmi0_in_vp0>; >+ }; >+}; >-- >2.34.1
