On Fri Dec 20, 2024 at 1:13 AM CET, Dmitry Baryshkov wrote:
> On Thu, Dec 19, 2024 at 04:05:56PM +0800, Damon Ding wrote:
> > void analogix_dp_get_lane_count(struct analogix_dp_device *dp, u32 *count)
> > @@ -546,10 +575,37 @@ void analogix_dp_get_lane_count(struct
> > analogix_dp_device *dp, u32 *count)
> > void analogix_dp_set_lane_link_training(struct analogix_dp_device *dp)
> > {
> > u8 lane;
> > + int ret;
> >
> > for (lane = 0; lane < dp->link_train.lane_count; lane++)
> > writel(dp->link_train.training_lane[lane],
> > dp->reg_base + ANALOGIX_DP_LN0_LINK_TRAINING_CTL + 4 *
> > lane);
> > +
> > + if (dp->phy) {
> > + union phy_configure_opts phy_cfg = {0};
> > +
> > + for (lane = 0; lane < dp->link_train.lane_count; lane++) {
> > + u8 training_lane = dp->link_train.training_lane[lane];
> > + u8 vs, pe;
> > +
> > + vs = (training_lane & DP_TRAIN_VOLTAGE_SWING_MASK) >>
> > + DP_TRAIN_VOLTAGE_SWING_SHIFT;
> > + pe = (training_lane & DP_TRAIN_PRE_EMPHASIS_MASK) >>
> > + DP_TRAIN_PRE_EMPHASIS_SHIFT;
> > + phy_cfg.dp.voltage[lane] = vs;
> > + phy_cfg.dp.pre[lane] = pe;
> > + }
> > +
> > + phy_cfg.dp.lanes = dp->link_train.lane_count;
> > + phy_cfg.dp.link_rate =
> > + drm_dp_bw_code_to_link_rate(dp->link_train.link_rate) /
> > 100;
>
> This two should not be necessary, please drop them.
This too or These two (statements)?
> > + phy_cfg.dp.set_voltages = true;
> > + ret = phy_configure(dp->phy, &phy_cfg);
> > + if (ret && ret != -EOPNOTSUPP) {
> > + dev_err(dp->dev, "%s: phy_configure() failed: %d\n",
> > __func__, ret);
> > + return;
> > + }
> > + }
> > }
> >
> > u32 analogix_dp_get_lane_link_training(struct analogix_dp_device *dp, u8
> > lane)
> > --
> > 2.34.1
> >
signature.asc
Description: PGP signature
