On Thu, Dec 19, 2024 at 04:06:03PM +0800, Damon Ding wrote:
> Add the necessary DT changes to enable eDP0 on RK3588S EVB1 board:
> - Add edp-panel node
> - Set pinctrl of pwm12 for backlight
> - Enable edp0/hdptxphy0/vp2
>
> Signed-off-by: Damon Ding <damon.d...@rock-chips.com>
>
> ---
>
> Changes in v2:
> - Remove brightness-levels and default-brightness-level properties in
> backlight node.
> - Add the detail DT changes to commit message.
>
> Changes in v3:
> - Use aux-bus instead of platform bus for edp-panel.
> ---
> .../boot/dts/rockchip/rk3588s-evb1-v10.dts | 52 +++++++++++++++++++
> 1 file changed, 52 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts
> b/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts
> index bc4077575beb..9547ab18e596 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts
> @@ -9,6 +9,7 @@
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/input/input.h>
> #include <dt-bindings/pinctrl/rockchip.h>
> +#include <dt-bindings/soc/rockchip,vop2.h>
> #include <dt-bindings/usb/pd.h>
> #include "rk3588s.dtsi"
>
> @@ -238,6 +239,41 @@ &combphy2_psu {
> status = "okay";
> };
>
> +&edp0 {
> + force-hpd;
> + status = "okay";
> +
> + aux-bus {
> + panel {
> + compatible = "lg,lp079qx1-sp0v";
Why do you need the particular compat string here? Can you use the
generic "edp-panel" instead? What if the user swaps the panel?
> + backlight = <&backlight>;
> + power-supply = <&vcc3v3_lcd_edp>;
> +
> + port {
> + panel_in_edp: endpoint {
> + remote-endpoint = <&edp_out_panel>;
> + };
> + };
> + };
> + };
> +};
> +
> +&edp0_in {
> + edp0_in_vp2: endpoint {
> + remote-endpoint = <&vp2_out_edp0>;
> + };
> +};
> +
> +&edp0_out {
> + edp_out_panel: endpoint {
> + remote-endpoint = <&panel_in_edp>;
> + };
> +};
> +
> +&hdptxphy0 {
> + status = "okay";
> +};
> +
> &i2c3 {
> status = "okay";
>
> @@ -399,6 +435,7 @@ usbc0_int: usbc0-int {
> };
>
> &pwm12 {
> + pinctrl-0 = <&pwm12m1_pins>;
> status = "okay";
> };
>
> @@ -1168,3 +1205,18 @@ usbdp_phy0_dp_altmode_mux: endpoint@1 {
> };
> };
> };
> +
> +&vop_mmu {
> + status = "okay";
> +};
> +
> +&vop {
> + status = "okay";
> +};
> +
> +&vp2 {
> + vp2_out_edp0: endpoint@ROCKCHIP_VOP2_EP_EDP0 {
> + reg = <ROCKCHIP_VOP2_EP_EDP0>;
> + remote-endpoint = <&edp0_in_vp2>;
> + };
> +};
> --
> 2.34.1
>
--
With best wishes
Dmitry
