Make video port registers nonvolatile. As DSP_CTRL register is written to twice due to gamma LUT enable bit which is set outside of the main DSP_CTRL initialization within atomic_enable (for rk356x case it is also necesarry to always disable gamma LUT before writing a new LUT) there is a chance that DSP_CTRL value read-out in gamma LUT init/update code is not the one which was written by the preceding DSP_CTRL initialization code within atomic_enable. This might result in misconfigured DSP_CTRL which leads to no visual output[1]. Since DSP_CTRL write takes effect after VSYNC[1] the issue is not always present. When tested on Pinetab2 with kernel 6.14 it happenes only when DRM is compiled as a module[1]. In order to confirm that it is because of timing I inserted 18ms udelay before vop2_crtc_atomic_try_set_gamma in atomic enable and compiled DRM as module - this has also fixed the issue on Pinetab2.
[1] https://lore.kernel.org/linux-rockchip/[email protected]/ Reported-by: Diederik de Haas <[email protected]> Closes: https://lore.kernel.org/linux-rockchip/[email protected]/ Suggested-by: Andy Yan <[email protected]> Signed-off-by: Piotr Zalewski <[email protected]> --- drivers/gpu/drm/rockchip/rockchip_drm_vop2.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c index d0f5fea15e21..241060cc24cb 100644 --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c @@ -2589,12 +2589,13 @@ static int vop2_win_init(struct vop2 *vop2) } /* - * The window registers are only updated when config done is written. - * Until that they read back the old value. As we read-modify-write - * these registers mark them as non-volatile. This makes sure we read - * the new values from the regmap register cache. + * The window and video port registers are only updated when config + * done is written. Until that they read back the old value. As we + * read-modify-write these registers mark them as non-volatile. This + * makes sure we read the new values from the regmap register cache. */ static const struct regmap_range vop2_nonvolatile_range[] = { + regmap_reg_range(RK3568_VP0_CTRL_BASE, RK3588_VP3_CTRL_BASE+255), regmap_reg_range(0x1000, 0x23ff), }; -- 2.50.0
