On Wed, Jul 30, 2025 at 07:02:46PM +0200, Louis Chauvet wrote:
> For am62 processors, we need to use the newly created clk-ctrl property to
> properly handle data edge sampling configuration. Add them in the main
> device tree.
>
> Fixes: 32a1795f57ee ("drm/tidss: New driver for TI Keystone platform Display
> SubSystem")
> Signed-off-by: Louis Chauvet <louis.chau...@bootlin.com>
> ---
>
> Cc: sta...@vger.kernel.org
> ---
> arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
> b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
> index
> 9e0b6eee9ac77d66869915b2d7bec3e2275c03ea..d3131e6da8e70fde035d3c44716f939e8167795a
> 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
> @@ -76,6 +76,11 @@ audio_refclk1: clock-controller@82e4 {
> assigned-clock-parents = <&k3_clks 157 18>;
> #clock-cells = <0>;
> };
> +
> + dss_clk_ctrl: dss_clk_ctrl@8300 {
> + compatible = "ti,am625-dss-clk-ctrl", "syscon";
> + reg = <0x8300 0x4>;
H/w blocks are rarely only 4 bytes of registers... Does this belong to
some larger block. The problem with bindings defining single registers
like this is they don't get defined until needed and you have a constant
stream of DT updates.
> + };
> };
>
> dmss: bus@48000000 {
> @@ -787,6 +792,7 @@ dss: dss@30200000 {
> <&k3_clks 186 2>;
> clock-names = "fck", "vp1", "vp2";
> interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
> + ti,clk-ctrl = <&dss_clk_ctrl>;
> status = "disabled";
>
> dss_ports: ports {
>
> --
> 2.50.1
>
