On Thu, 11 Sep 2025 15:28:50 +0300, Abel Vesa wrote:
> Document the DisplayPort controller found in the Qualcomm Glymur SoC.
> There are 4 controllers and their base addresses and layouts differ,
> therefore being incompatible with all previous platforms.
> 
> Signed-off-by: Abel Vesa <abel.v...@linaro.org>
> ---
>  Documentation/devicetree/bindings/display/msm/dp-controller.yaml | 3 +++
>  1 file changed, 3 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,glymur-mdss.example.dtb:
 displayport-controller@ae90000 (qcom,glymur-dp): reg: [[0, 183042048], [0, 
512], [0, 183042560], [0, 512], [0, 183043072], [0, 1536], [0, 183046144], [0, 
1024], [0, 183047168], [0, 1024]] is too long
        from schema $id: 
http://devicetree.org/schemas/display/msm/dp-controller.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,glymur-mdss.example.dtb:
 displayport-controller@ae90000 (qcom,glymur-dp): reg: [[0, 183042048], [0, 
512], [0, 183042560], [0, 512], [0, 183043072], [0, 1536], [0, 183046144], [0, 
1024], [0, 183047168], [0, 1024]] is too long
        from schema $id: 
http://devicetree.org/schemas/display/msm/dp-controller.yaml#

doc reference errors (make refcheckdocs):

See 
https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250911-glymur-display-v1-3-d391a3432...@linaro.org

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.

Reply via email to