From: Jun Nie <[email protected]> Some panels support multiple slice to be sent in a single DSC packet. And this feature is a must for specific panels, such as JDI LPM026M648C. Add a dsc_slice_per_pkt member into struct mipi_dsi_device and support the feature in msm mdss driver.
Co-developed-by: Jonathan Marek <[email protected]> Signed-off-by: Jonathan Marek <[email protected]> Signed-off-by: Jun Nie <[email protected]> Signed-off-by: Junjie Cao <[email protected]> --- drivers/gpu/drm/msm/dsi/dsi_host.c | 25 ++++++++++--------------- include/drm/drm_mipi_dsi.h | 2 ++ 2 files changed, 12 insertions(+), 15 deletions(-) diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c index e0de545d4077..773ce8520698 100644 --- a/drivers/gpu/drm/msm/dsi/dsi_host.c +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c @@ -166,6 +166,7 @@ struct msm_dsi_host { struct drm_display_mode *mode; struct drm_dsc_config *dsc; + unsigned int dsc_slice_per_pkt; /* connected device info */ unsigned int channel; @@ -910,17 +911,10 @@ static void dsi_update_dsc_timing(struct msm_dsi_host *msm_host, bool is_cmd_mod slice_per_intf = dsc->slice_count; total_bytes_per_intf = dsc->slice_chunk_size * slice_per_intf; - bytes_per_pkt = dsc->slice_chunk_size; /* * slice_per_pkt; */ + bytes_per_pkt = dsc->slice_chunk_size * msm_host->dsc_slice_per_pkt; eol_byte_num = total_bytes_per_intf % 3; - - /* - * Typically, pkt_per_line = slice_per_intf * slice_per_pkt. - * - * Since the current driver only supports slice_per_pkt = 1, - * pkt_per_line will be equal to slice per intf for now. - */ - pkt_per_line = slice_per_intf; + pkt_per_line = slice_per_intf / msm_host->dsc_slice_per_pkt; if (is_cmd_mode) /* packet data type */ reg = DSI_COMMAND_COMPRESSION_MODE_CTRL_STREAM0_DATATYPE(MIPI_DSI_DCS_LONG_WRITE); @@ -1069,12 +1063,8 @@ static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_bonded_dsi) else /* * When DSC is enabled, WC = slice_chunk_size * slice_per_pkt + 1. - * Currently, the driver only supports default value of slice_per_pkt = 1 - * - * TODO: Expand mipi_dsi_device struct to hold slice_per_pkt info - * and adjust DSC math to account for slice_per_pkt. */ - wc = msm_host->dsc->slice_chunk_size + 1; + wc = msm_host->dsc->slice_chunk_size * msm_host->dsc_slice_per_pkt + 1; dsi_write(msm_host, REG_DSI_CMD_MDP_STREAM0_CTRL, DSI_CMD_MDP_STREAM0_CTRL_WORD_COUNT(wc) | @@ -1683,8 +1673,13 @@ static int dsi_host_attach(struct mipi_dsi_host *host, msm_host->lanes = dsi->lanes; msm_host->format = dsi->format; msm_host->mode_flags = dsi->mode_flags; - if (dsi->dsc) + if (dsi->dsc) { msm_host->dsc = dsi->dsc; + msm_host->dsc_slice_per_pkt = dsi->dsc_slice_per_pkt; + /* for backwards compatibility, assume 1 if not set */ + if (!msm_host->dsc_slice_per_pkt) + msm_host->dsc_slice_per_pkt = 1; + } ret = dsi_dev_attach(msm_host->pdev); if (ret) diff --git a/include/drm/drm_mipi_dsi.h b/include/drm/drm_mipi_dsi.h index 3aba7b380c8d..2ddec7931bd0 100644 --- a/include/drm/drm_mipi_dsi.h +++ b/include/drm/drm_mipi_dsi.h @@ -180,6 +180,7 @@ struct mipi_dsi_device_info { * be set to the real limits of the hardware, zero is only accepted for * legacy drivers * @dsc: panel/bridge DSC pps payload to be sent + * @dsc_slice_per_pkt: number of DSC slices to be sent as in a single packet */ struct mipi_dsi_device { struct mipi_dsi_host *host; @@ -194,6 +195,7 @@ struct mipi_dsi_device { unsigned long hs_rate; unsigned long lp_rate; struct drm_dsc_config *dsc; + unsigned int dsc_slice_per_pkt; }; /** -- 2.48.1
