On Mon, 22 Dec 2025 00:32:16 +0100, Marijn Suijten wrote:
> The ANA6707 Display-Driver-IC is paired with the amb650yl01 panel in the
> Sony Xperia 1 III, Sony Xperia 1 IV and Sony Xperia V smartphones. It
> uses Display Stream Compression 1.1 and requires dual DSI interfaces to
> satisfy the bandwidth requirements to run at 1644x3840 at 120Hz.
>
> Signed-off-by: Marijn Suijten <[email protected]>
> ---
> .../bindings/display/panel/samsung,ana6707.yaml | 91
> ++++++++++++++++++++++
> MAINTAINERS | 5 ++
> 2 files changed, 96 insertions(+)
>
My bot found errors running 'make dt_binding_check' on your patch:
yamllint warnings/errors:
dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/panel/samsung,sofef01-m.example.dtb:
panel@0 (samsung,sofef01-m-amb609tc01): 'vci-supply' does not match any of the
regexes: '^pinctrl-[0-9]+$'
from schema $id:
http://devicetree.org/schemas/display/panel/samsung,sofef01-m.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/panel/samsung,ana6707.example.dtb:
panel@0 (samsung,ana6707-amb650yl01): 'ports' does not match any of the
regexes: '^pinctrl-[0-9]+$'
from schema $id:
http://devicetree.org/schemas/display/panel/samsung,ana6707.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/panel/samsung,ana6707.example.dtb:
panel@0 (samsung,ana6707-amb650yl01): 'port' is a required property
from schema $id:
http://devicetree.org/schemas/display/panel/samsung,ana6707.yaml
doc reference errors (make refcheckdocs):
See
https://patchwork.kernel.org/project/devicetree/patch/[email protected]
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
