> On Dec 25, 2025, at 00:12, Icenowy Zheng <[email protected]> wrote:
>
> From: Icenowy Zheng <[email protected]>
>
> T-Head TH1520 SoC contains a Verisilicon DC8200 display controller
> (called DPU in manual) and a Synopsys DesignWare HDMI TX controller.
>
> Add device tree nodes to them.
>
> Signed-off-by: Icenowy Zheng <[email protected]>
> Signed-off-by: Icenowy Zheng <[email protected]>
> ---
> No changes in v4.
>
> Changes in v3:
> - Adapting to the changed binding.
>
> No changes in v2.
>
> arch/riscv/boot/dts/thead/th1520.dtsi | 70 +++++++++++++++++++++++++++
> 1 file changed, 70 insertions(+)
>
> diff --git a/arch/riscv/boot/dts/thead/th1520.dtsi
> b/arch/riscv/boot/dts/thead/th1520.dtsi
> index bd5d33840884e..5c0a7072f253a 100644
> --- a/arch/riscv/boot/dts/thead/th1520.dtsi
> +++ b/arch/riscv/boot/dts/thead/th1520.dtsi
> @@ -585,6 +585,76 @@ clk_vo: clock-controller@ffef528050 {
> #clock-cells = <1>;
> };
>
> + hdmi: hdmi@ffef540000 {
> + compatible = "thead,th1520-dw-hdmi";
> + reg = <0xff 0xef540000 0x0 0x40000>;
> + reg-io-width = <4>;
> + interrupts = <111 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk_vo CLK_HDMI_PCLK>,
> + <&clk_vo CLK_HDMI_SFR>,
> + <&clk_vo CLK_HDMI_CEC>,
> + <&clk_vo CLK_HDMI_PIXCLK>;
> + clock-names = "iahb", "isfr", "cec", "pix";
> + resets = <&rst TH1520_RESET_ID_HDMI>,
> + <&rst TH1520_RESET_ID_HDMI_APB>;
> + reset-names = "main", "apb";
> + status = "disabled";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> +
> + hdmi_in: endpoint {
> + remote-endpoint = <&dpu_out_dp1>;
> + };
> + };
> +
> + hdmi_out_port: port@1 {
> + reg = <1>;
> + };
> + };
> + };
> +
> + dpu: display@ffef600000 {
> + compatible = "thead,th1520-dc8200", "verisilicon,dc";
> + reg = <0xff 0xef600000 0x0 0x100000>;
> + interrupts = <93 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk_vo CLK_DPU_CCLK>,
> + <&clk_vo CLK_DPU_ACLK>,
> + <&clk_vo CLK_DPU_HCLK>,
> + <&clk_vo CLK_DPU_PIXELCLK0>,
> + <&clk_vo CLK_DPU_PIXELCLK1>;
> + clock-names = "core", "axi", "ahb", "pix0", "pix1";
> + resets = <&rst TH1520_RESET_ID_DPU_CORE>,
> + <&rst TH1520_RESET_ID_DPU_AXI>,
> + <&rst TH1520_RESET_ID_DPU_AHB>;
> + reset-names = "core", "axi", "ahb";
> + status = "disabled";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + dpu_port0: port@0 {
> + reg = <0>;
> + };
> +
> + dpu_port1: port@1 {
> + reg = <1>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + dpu_out_dp1: endpoint@1 {
> + reg = <1>;
> + remote-endpoint = <&hdmi_in>;
> + };
> + };
> + };
> + };
> +
> dmac0: dma-controller@ffefc00000 {
> compatible = "snps,axi-dma-1.01a";
> reg = <0xff 0xefc00000 0x0 0x1000>;
> --
> 2.52.0
>
Tested-by: Han Gao <[email protected]>
