> On Dec 25, 2025, at 00:11, Icenowy Zheng <[email protected]> wrote:
>
> From: Icenowy Zheng <[email protected]>
>
> Verisilicon has a series of display controllers prefixed with DC and
> with self-identification facility like their GC series GPUs.
>
> Add a device tree binding for it.
>
> Depends on the specific DC model, it can have either one or two display
> outputs, and each display output could be set to DPI signal or "DP"
> signal (which seems to be some plain parallel bus to HDMI controllers).
>
> Signed-off-by: Icenowy Zheng <[email protected]>
> Signed-off-by: Icenowy Zheng <[email protected]>
> ---
> Changes in v4:
> - Added a comment for "verisilicon,dc" that says the ID/revision is
> discoverable via registers.
> - Removed clock minItems constraint w/o specific compatible strings.
>
> Changes in v3:
> - Added SoC-specific compatible string, and arm the binding with clock /
> port checking for the specific SoC (with a 2-output DC).
>
> Changes in v2:
> - Fixed misspelt "versilicon" in title.
> - Moved minItems in clock properties to be earlier than items.
> - Re-aligned multi-line clocks and resets in example.
>
> .../bindings/display/verisilicon,dc.yaml | 144 ++++++++++++++++++
> 1 file changed, 144 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/display/verisilicon,dc.yaml
>
> diff --git a/Documentation/devicetree/bindings/display/verisilicon,dc.yaml
> b/Documentation/devicetree/bindings/display/verisilicon,dc.yaml
> new file mode 100644
> index 0000000000000..fe64cc1466690
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/verisilicon,dc.yaml
> @@ -0,0 +1,144 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/verisilicon,dc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Verisilicon DC-series display controllers
> +
> +maintainers:
> + - Icenowy Zheng <[email protected]>
> +
> +properties:
> + $nodename:
> + pattern: "^display@[0-9a-f]+$"
> +
> + compatible:
> + items:
> + - enum:
> + - thead,th1520-dc8200
> + - const: verisilicon,dc # DC IPs have discoverable ID/revision
> registers
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + clocks:
> + items:
> + - description: DC Core clock
> + - description: DMA AXI bus clock
> + - description: Configuration AHB bus clock
> + - description: Pixel clock of output 0
> + - description: Pixel clock of output 1
> +
> + clock-names:
> + items:
> + - const: core
> + - const: axi
> + - const: ahb
> + - const: pix0
> + - const: pix1
> +
> + resets:
> + items:
> + - description: DC Core reset
> + - description: DMA AXI bus reset
> + - description: Configuration AHB bus reset
> +
> + reset-names:
> + items:
> + - const: core
> + - const: axi
> + - const: ahb
> +
> + ports:
> + $ref: /schemas/graph.yaml#/properties/ports
> +
> + properties:
> + port@0:
> + $ref: /schemas/graph.yaml#/properties/port
> + description: The first output channel , endpoint 0 should be
> + used for DPI format output and endpoint 1 should be used
> + for DP format output.
> +
> + port@1:
> + $ref: /schemas/graph.yaml#/properties/port
> + description: The second output channel if the DC variant
> + supports. Follow the same endpoint addressing rule with
> + the first port.
> +
> + required:
> + - port@0
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - clocks
> + - clock-names
> + - ports
> +
> +allOf:
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: thead,th1520-dc8200
> + then:
> + properties:
> + clocks:
> + minItems: 5
> + ports:
> + required:
> + - port@0
> + - port@1
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/irq.h>
> + #include <dt-bindings/clock/thead,th1520-clk-ap.h>
> + #include <dt-bindings/reset/thead,th1520-reset.h>
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + display@ffef600000 {
> + compatible = "thead,th1520-dc8200", "verisilicon,dc";
> + reg = <0xff 0xef600000 0x0 0x100000>;
> + interrupts = <93 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk_vo CLK_DPU_CCLK>,
> + <&clk_vo CLK_DPU_ACLK>,
> + <&clk_vo CLK_DPU_HCLK>,
> + <&clk_vo CLK_DPU_PIXELCLK0>,
> + <&clk_vo CLK_DPU_PIXELCLK1>;
> + clock-names = "core", "axi", "ahb", "pix0", "pix1";
> + resets = <&rst TH1520_RESET_ID_DPU_CORE>,
> + <&rst TH1520_RESET_ID_DPU_AXI>,
> + <&rst TH1520_RESET_ID_DPU_AHB>;
> + reset-names = "core", "axi", "ahb";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + };
> +
> + port@1 {
> + reg = <1>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + dpu_out_dp1: endpoint@1 {
> + reg = <1>;
> + remote-endpoint = <&hdmi_in>;
> + };
> + };
> + };
> + };
> + };
> --
> 2.52.0
>
Tested-by: Han Gao <[email protected] <mailto:[email protected]>>
