This series adds support for the two dsi based display interfaces of the phyboard-izar with the phycore-am68x/tda4x som.
dsi0 gets converted to lvds on the som using a SN65DSI83 bridge in the default configuration. The phyboard-izar kit comes with a 10.1" lvds display with usb touch as addon. dsi1 is routed to the carrier board onto a connector. To use that Phytec has developed a small extension board "PEB-AV-15" with a Lontium LT8912B dsi->hdmi bridge. Dominik Haller (6): arm64: dts: ti: k3-am68-phyboard-izar: Assign dss clocks arm64: dts: ti: k3-am68-phycore-som: Add DSI->LVDS bridge arm64: dts: ti: k3-am68-phyboard-izar: Add LVDS-Display arm64: dts: ti: k3-j721s2-main: Add DSI1 dt-bindings: display: bridge: lt8912b: Drop reset gpio requirement arm64: dts: ti: k3-am68-phyboard-izar: Add PEB-AV-15 overlay .../display/bridge/lontium,lt8912b.yaml | 1 - arch/arm64/boot/dts/ti/Makefile | 8 + ...-am68-phyboard-izar-lvds-ph128800t006.dtso | 125 ++++++++++++ .../ti/k3-am68-phyboard-izar-peb-av-15.dtso | 192 ++++++++++++++++++ .../boot/dts/ti/k3-am68-phyboard-izar.dts | 18 ++ .../boot/dts/ti/k3-am68-phycore-som.dtsi | 17 ++ arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 39 ++++ 7 files changed, 399 insertions(+), 1 deletion(-) create mode 100644 arch/arm64/boot/dts/ti/k3-am68-phyboard-izar-lvds-ph128800t006.dtso create mode 100644 arch/arm64/boot/dts/ti/k3-am68-phyboard-izar-peb-av-15.dtso -- 2.43.0
