On 5/18/26 21:47, Jonas Karlman wrote:
The bridge connector report ycbcr_420_allowed support when all bridges
in the chain support ycbcr_420_allowed.
Report ycbcr_420_allowed on the encoder bridge so that the bridge
connector automatically can report correct ycbcr_420_allowed support.
Signed-off-by: Jonas Karlman <[email protected]>
---
drivers/gpu/drm/meson/meson_encoder_hdmi.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/meson/meson_encoder_hdmi.c
b/drivers/gpu/drm/meson/meson_encoder_hdmi.c
index 45104ef35344..484675cb8284 100644
--- a/drivers/gpu/drm/meson/meson_encoder_hdmi.c
+++ b/drivers/gpu/drm/meson/meson_encoder_hdmi.c
@@ -354,6 +354,7 @@ int meson_encoder_hdmi_probe(struct meson_drm *priv)
meson_encoder_hdmi->bridge.of_node = priv->dev->of_node;
meson_encoder_hdmi->bridge.type = DRM_MODE_CONNECTOR_HDMIA;
meson_encoder_hdmi->bridge.interlace_allowed = true;
+ meson_encoder_hdmi->bridge.ycbcr_420_allowed = true;
pdev = of_find_device_by_node(remote);
of_node_put(remote);
@@ -406,9 +407,6 @@ int meson_encoder_hdmi_probe(struct meson_drm *priv)
drm_connector_attach_max_bpc_property(meson_encoder_hdmi->connector, 8, 8);
- /* Handle this here until handled by drm_bridge_connector_init() */
- meson_encoder_hdmi->connector->ycbcr_420_allowed = true;
-
priv->encoders[MESON_ENC_HDMI] = meson_encoder_hdmi;
dev_dbg(priv->dev, "HDMI encoder initialized\n");
Reviewed-by: Neil Armstrong <[email protected]>
Thanks,
Neil
