This series adds support for the Verisilicon DCUltraLite display controller as integrated in the Nuvoton MA35D1 SoC.
The Verisilicon DC driver and its DT binding were originally written by Icenowy Zheng <[email protected]> for the T-Head TH1520 SoC, which carries a DC8200 IP block. The present series builds on that foundation with gratitude to Icenowy for the original work. The DCUltraLite is a different variant in the DC IP family. While the two IPs share a broadly similar register layout, a number of differences prevent the existing driver from working on the MA35D1 without modification: - No CONFIG_EX commit path: the DC8200 staging registers (FB_CONFIG_EX, FB_TOP_LEFT, FB_BOTTOM_RIGHT, FB_BLEND_CONFIG, PANEL_CONFIG_EX) are absent. The DCUltraLite uses enable (bit 0) and reset (bit 4) bits in FB_CONFIG for direct framebuffer updates, and requires a per-frame VALID bit toggle (FB_CONFIG bit 3) to latch configuration changes. - No PANEL_START register: panel output begins when PANEL_CONFIG.RUNNING is set; the DC8200 multi-display sync start register at 0x1CCC does not exist. - Different IRQ registers: DISP_IRQ_STA at 0x147C / DISP_IRQ_EN at 0x1480, versus the DC8200's TOP_IRQ_ACK at 0x0010 / TOP_IRQ_EN at 0x0014. - Simpler clock topology: two clocks ("core" bus gate and "pix0" pixel divider); no axi or ahb clocks required. - Single display output: no per-output indexing beyond index 0 is needed. - Hardware-discoverable identity: the DCUltraLite exposes chip identity registers whose model field reads 0x0 (revision 0x5560, customer_id 0x305), allowing the existing vs_fill_chip_identity() path to identify the variant purely through register reads. Patch 1 generalises the verisilicon,dc DT binding to accommodate the Nuvoton MA35D1 SoC-specific compatible and the variant's two-clock, one-reset, single-port topology. Patch 2 adds the register-level macros needed by the DC8000 ops. Patches 3-5 introduce the driver changes in three logical steps: the vs_dc_funcs hardware ops vtable with DC8200 ops extracted into vs_dc8200.c; the DC8000 ops in vs_dc8000.c with the necessary clock-optionality changes; and finally the DCUltraLite HWDB entry that gates hardware recognition once all support is in place. Patch 6 adds the Kconfig dependency on ARCH_MA35, placed last because it is only meaningful after the HWDB entry is added. All patches have been tested on Nuvoton MA35D1 hardware. Changes from v3: - [dt-bindings] Reverted extra space before inline '#' comment. - [dt-bindings] Moved clock/reset items descriptions from the top-level clocks:/resets: into the per-variant allOf/if blocks; kept only minItems/maxItems at the top level. - [dt-bindings] Restored full items lists for clock-names and reset-names at the top level with minItems so names are still validated. - [dt-bindings] Added minItems: 1 to resets: in the nuvoton block. - [dt-bindings] Added required: [resets, reset-names] inside the then: block for both thead,th1520-dc8200 and nuvoton,ma35d1-dcu. - [dt-bindings] Added minItems: 3 to reset-names in the thead block. - [dt-bindings] Added maxItems: 1 to reset-names in the nuvoton block. - [dt-bindings] Reverted unevaluatedProperties: false back to additionalProperties: false. - [dt-bindings] Removed the second DT example for nuvoton,ma35d1-dcu since a difference in clocks/resets does not need a new example. - [ops] Renamed bridge_enable/bridge_disable to panel_enable_ex/ panel_disable_ex. - [ops] Renamed irq_handler to irq_ack. - [ops] Renamed plane_enable_ex/disable_ex/update_ex to primary_plane_enable_ex/disable_ex/update_ex. - [ops] Renamed vs_dcu_lite.c to vs_dc8000.c, all internal functions from vs_dcu_lite_* to vs_dc8000_*, exported symbol from vs_dcu_lite_funcs to vs_dc8000_funcs; updated Makefile. - [kconfig] Moved ARCH_MA35 Kconfig change to a separate final commit, placed after the HWDB entry. Joey Lu (6): dt-bindings: display: verisilicon,dc: generalize for single-output variants drm/verisilicon: add register-level macros for DC8000 drm/verisilicon: introduce per-variant hardware ops table drm/verisilicon: add DC8000 (DCUltraLite) display controller support drm/verisilicon: add DCUltraLite chip identity to HWDB drm/verisilicon: extend Kconfig to support ARCH_MA35 platforms .../bindings/display/verisilicon,dc.yaml | 80 +++++++++++-- drivers/gpu/drm/verisilicon/Kconfig | 2 +- drivers/gpu/drm/verisilicon/Makefile | 2 +- drivers/gpu/drm/verisilicon/vs_bridge.c | 20 +--- drivers/gpu/drm/verisilicon/vs_crtc.c | 38 ++++++- drivers/gpu/drm/verisilicon/vs_crtc_regs.h | 1 + drivers/gpu/drm/verisilicon/vs_dc.c | 13 ++- drivers/gpu/drm/verisilicon/vs_dc.h | 33 ++++++ drivers/gpu/drm/verisilicon/vs_dc8000.c | 78 +++++++++++++ drivers/gpu/drm/verisilicon/vs_dc8200.c | 107 ++++++++++++++++++ drivers/gpu/drm/verisilicon/vs_hwdb.c | 14 +++ drivers/gpu/drm/verisilicon/vs_hwdb.h | 6 + .../gpu/drm/verisilicon/vs_primary_plane.c | 32 +----- .../drm/verisilicon/vs_primary_plane_regs.h | 3 + 14 files changed, 368 insertions(+), 61 deletions(-) create mode 100644 drivers/gpu/drm/verisilicon/vs_dc8000.c create mode 100644 drivers/gpu/drm/verisilicon/vs_dc8200.c -- 2.43.0
