Thank you for your contribution! Sashiko AI review found 3 potential issue(s) to consider:
Pre-existing issues: - [High] Unhandled hardware state when reading REG_AUDIO_INPUT_FREQ leads to division by zero and kernel panic. - [Medium] Missing error handling for I2C reads leads to data corruption in video timing calculations. - [Medium] Data race in `it6505_calc_video_info` corrupts pixel clock counter reading. -- --- Patch [6]: [PATCH v6 06/13] drm/bridge: it6505: avoid division by zero in pixel clock calculation --- commit 00522edef86150c061773cb0103cee92136a7a79 Author: Daniel Golle <[email protected]> Subject: drm/bridge: it6505: avoid division by zero in pixel clock calculation This commit fixes a potential division by zero in the pixel clock computation. It moves the division of the counter sum to after the zero check to avoid truncation of small values. This prevents sums of 1 or 2 from being evaluated as 0 and bypassing the check. > diff --git a/drivers/gpu/drm/bridge/ite-it6505.c > b/drivers/gpu/drm/bridge/ite-it6505.c > index 3806b0b966376..b7eb746c8f8e5 100644 > --- a/drivers/gpu/drm/bridge/ite-it6505.c > +++ b/drivers/gpu/drm/bridge/ite-it6505.c > @@ -751,12 +751,13 @@ static void it6505_calc_video_info(struct it6505 > *it6505) > sum += rddata; [Severity: Medium] This is a pre-existing issue, but does this bitwise mask without checking for negative error codes cause data corruption? If I2C reads fail and return -ENODEV, the negative return value is directly bitwise-masked and treated as a valid hardware reading. For example, earlier in it6505_calc_video_info(): htotal = it6505_read_word(it6505, REG_INPUT_HTOTAL) & 0x1FFF; And similarly for the counter: rddata = it6505_read_word(it6505, REG_PCLK_COUNTER_VALUE) & 0xFFF; sum += rddata; Could this lead to negative error codes being added to the counter sum, corrupting the subsequent pixel clock math? [Severity: Medium] This isn't a bug introduced by this patch, but is there a data race in it6505_calc_video_info() that corrupts the pixel clock counter reading? This function performs a multi-step hardware sequence without holding any locks: it6505_set_bits(it6505, REG_DATA_CTRL0, ENABLE_PCLK_COUNTER, ENABLE_PCLK_COUNTER); usleep_range(10000, 15000); it6505_set_bits(it6505, REG_DATA_CTRL0, ENABLE_PCLK_COUNTER, 0x00); rddata = ... Since this can be executed concurrently by the threaded IRQ handler it6505_irq_scdt() and the debugfs read handler receive_timing_debugfs_show(), could a debugfs read occurring during the IRQ handling interleave register writes? One thread might disable the counter prematurely while the other is sleeping, resulting in an abnormally small reading. Is this race condition the root cause of the division by zero that this patch attempts to mitigate? > } > > + sum /= 3; > + > if (sum == 0) { > DRM_DEV_DEBUG_DRIVER(dev, "calc video timing error"); > return; > } > > - sum /= 3; > pclk = 13500 * 2048 / sum; > it6505->video_info.clock = pclk; > it6505->video_info.hdisplay = hdew; [Severity: High] This is a pre-existing issue not introduced by this patch, but can reading an unhandled hardware state lead to a kernel panic? Looking at it6505_enable_audio(): regbe = it6505_read(it6505, REG_AUDIO_INPUT_FREQ); DRM_DEV_DEBUG_DRIVER(dev, "regbe:0x%02x audio input fs: %d.%d kHz", regbe, 6750 / regbe, (6750 % regbe) * 10 / regbe); If the hardware register contains 0, for instance if the audio clock is not fully active or uninitialized, will the subsequent DRM_DEV_DEBUG_DRIVER macro trigger a division by zero when evaluating 6750 / regbe? -- Sashiko AI review ยท https://sashiko.dev/#/patchset/[email protected]?part=6
