On 13/08/2026 19:58, Wheeler, Daniel wrote:
Public Thanks for the fixes Melissa, we'll re-add them to next week's promotion and re-test.
Nice! Thank you! Melissa
Thank you, Dan Wheeler Sr. Technologist | AMD SW Display ------------------------------------------------------------------------------------------------------------------ 1 Commerce Valley Dr E, Thornhill, ON L3T 7X6 amd.com -----Original Message----- From: Melissa Wen <[email protected]> Sent: Thursday, August 13, 2026 10:30 AM To: [email protected]; Deucher, Alexander <[email protected]>; Koenig, Christian <[email protected]>; [email protected]; Wentland, Harry <[email protected]>; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; Li, Sun peng (Leo) <[email protected]>; [email protected] Cc: Hung, Alex <[email protected]>; Wheeler, Daniel <[email protected]>; [email protected]; Lyude Paul <[email protected]>; [email protected]; [email protected] Subject: [PATCH v3 0/3] drm/atomic-state-helper: fixes for blend-mode-prop warning PREMULTI was the default DRM blend mode until 9813e158d13d ("drm/drm_blend: allow blend mode property without PREMULTI") introduced the possibility of exposing the blend mode property without PREMULTI being supported. However, __drm_atomic_helper_plane_state_init() still resets pixel_blend_mode to PREMULTI (hardcoded), ignoring the supported mode in this property. In the same series, 860e748bddcc ("drm: ensure blend mode supported if pixel format with alpha exposed") starts warning drivers that supports alpha formats in a given planes but doesn't support blend mode property, which includes AMD primary and cursor planes. For AMD DCN families, overlay and primary planes support the three blend modes, and therefore PREMULTI is still the default mode. So the warning can be fixed by just creating blend mode properties for primary planes too. PREMULTI is the default/unique mode for cursor planes in DCN and DCE driver. However, looks like PIXEL_NONE is the unique blend mode supported by DCE-generation driver. I don't have the hardware to check it out, but looking at the code I understand that, even if the hardware can do PREMULTI or COVERAGE, the way it programs registers doesn't make these other blend modes actually available. Bearing this in mind, this series is organized as follow: - Patch 1 fixes the pixel_blend_mode reset when the blend mode property is advertised without PREMULTI support. It's needed for AMD DCE-generation (patch 3) and I think with this we can also remove a workaround in nouveau nv50_wndw_default_state() caused by the hardcoded PREMULTI default value [1]. - Patch 2 fixes the missing-blend-mode-property warning for DCN primary plane and for DCN+DCE cursor plane. The alpha property keeps only on overlay planes because looks like this is not supported by AMD primary planes and it doesn't affect the blend mode warning we are targetting. Enabling alpha properties to primary was also causing -EINVAL on IGT alpha tests because it started testing primary planes and disabling it (which is not allowed by the AMD display driver). - Patch 3 fixes the warning for DCE primary plane, but I detached this solution from the previous patch because I don't have hardware to validate if my assumption about PIXEL_NONE-only is correct. [1] https://lore.kernel.org/dri-devel/[email protected]/ [v1]: https://lore.kernel.org/dri-devel/[email protected]/ Changes: - new patch for pixel_blend_mode default value other than PREMULTI. - remove DCE11 which supports per_pixel_alpha but doesn't support DCN_UNIVERSAL_PLANE. - new patch for the primary plane blend mode on DCE-generations [v2]: https://lore.kernel.org/dri-devel/[email protected]/ Changes: - keep alpha property only for overlay planes (looks like primary plane doesn't actually support it) - alpha prop in primary planes causes IGT test failures with RX 7900 XT on a 4k60 HP U27 as reported by Daniel Wheeler. - improve readability of if conditions (Alex H) - add Leandro's r-b tags. Best Regards, Melissa Melissa Wen (3): drm/atomic-state-helper: set pixel_blend_mode to prop default on reset drm/amd/display: fix missing blend-mode-prop warning for DCN drm/amd/display: advertise PIXEL_NONE as blend mode for DCE generations .../amd/display/amdgpu_dm/amdgpu_dm_plane.c | 25 ++++++++++++++++--- drivers/gpu/drm/drm_atomic_state_helper.c | 7 ++++++ 2 files changed, 29 insertions(+), 3 deletions(-) -- 2.53.0
