The TVE200 vertical interrupt can remain pending after acknowledgment.
Using rising-edge triggering can leave it unserviced when no new edge
is generated, causing vblank and page-flip timeouts on the D-Link DIR-685.
Use level-high triggering in the binding example so a pending interrupt
is delivered again without requiring a new edge.
Fixes: 8b17e80d9e46 ("drm/tve200: Add DT bindings")
Assisted-by: LLM
Signed-off-by: Linus Walleij <[email protected]>
---
Documentation/devicetree/bindings/display/faraday,tve200.yaml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/display/faraday,tve200.yaml
b/Documentation/devicetree/bindings/display/faraday,tve200.yaml
index b09628b69177..43dbe2778d6b 100644
--- a/Documentation/devicetree/bindings/display/faraday,tve200.yaml
+++ b/Documentation/devicetree/bindings/display/faraday,tve200.yaml
@@ -54,7 +54,7 @@ examples:
display-controller@6a000000 {
compatible = "faraday,tve200";
reg = <0x6a000000 0x1000>;
- interrupts = <13 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
resets = <&syscon GEMINI_RESET_TVC>;
clocks = <&syscon GEMINI_CLK_GATE_TVC>,
<&syscon GEMINI_CLK_TVC>;
--
2.55.0
