On Tue, Sep 15, 2026 at 08:03:26PM +0800, Quchaosheng wrote: > Convert the TPD12S015 HDMI level shifter binding to DT schema. > > The TI TPD12S015 is an HDMI companion chip that combines a level shifter > and ESD protection circuitry. Document the two ports it exposes between > the HDMI transmitter and the connector. > > The tpd12s016 is described as software compatible with the tpd12s015 and > is listed as a fallback compatible by am57xx-idk-common.dtsi, so accept > both orderings. Boards that also route the DDC lines through the chip > pass five GPIOs rather than three.
Assisted-by tag missing. This patch also seems to be missing understanding of what you're doing. Not only does it combine conversion to YAML and changes to the bindings in one patch, it also gives no rationale for the changes. Please don't waste maintainer's time with LLM-generated patches that you haven't tried to understand. > Signed-off-by: Quchaosheng <[email protected]> > --- > .../bindings/display/ti/ti,tpd12s015.txt | 44 --------- > .../bindings/display/ti/ti,tpd12s015.yaml | 93 +++++++++++++++++++ > 2 files changed, 93 insertions(+), 44 deletions(-) > delete mode 100644 > Documentation/devicetree/bindings/display/ti/ti,tpd12s015.txt > create mode 100644 > Documentation/devicetree/bindings/display/ti/ti,tpd12s015.yaml > > diff --git a/Documentation/devicetree/bindings/display/ti/ti,tpd12s015.txt > b/Documentation/devicetree/bindings/display/ti/ti,tpd12s015.txt > deleted file mode 100644 > index 26e6d32e3..000000000 > --- a/Documentation/devicetree/bindings/display/ti/ti,tpd12s015.txt > +++ /dev/null > @@ -1,44 +0,0 @@ > -TPD12S015 HDMI level shifter and ESD protection chip > -==================================================== > - > -Required properties: > -- compatible: "ti,tpd12s015" > - > -Optional properties: > -- gpios: CT CP HPD, LS OE and HPD gpios > - > -Required nodes: > -- Video port 0 for HDMI input > -- Video port 1 for HDMI output > - > -Example > -------- > - > -tpd12s015: encoder@1 { > - compatible = "ti,tpd12s015"; > - > - gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>, /* 60, CT CP HPD */ > - <&gpio2 9 GPIO_ACTIVE_HIGH>, /* 41, LS OE */ > - <&gpio2 31 GPIO_ACTIVE_HIGH>; /* 63, HPD */ > - > - ports { > - #address-cells = <1>; > - #size-cells = <0>; > - > - port@0 { > - reg = <0>; > - > - tpd12s015_in: endpoint@0 { > - remote-endpoint = <&hdmi_out>; > - }; > - }; > - > - port@1 { > - reg = <1>; > - > - tpd12s015_out: endpoint@0 { > - remote-endpoint = <&hdmi_connector_in>; > - }; > - }; > - }; > -}; > diff --git a/Documentation/devicetree/bindings/display/ti/ti,tpd12s015.yaml > b/Documentation/devicetree/bindings/display/ti/ti,tpd12s015.yaml > new file mode 100644 > index 000000000..b3351b601 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/ti/ti,tpd12s015.yaml > @@ -0,0 +1,93 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/ti/ti,tpd12s015.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: TI TPD12S015 HDMI level shifter and ESD protection chip > + > +maintainers: > + - Tomi Valkeinen <[email protected]> > + > +description: | > + The TPD12S015 is an HDMI companion chip that combines a level shifter and > + ESD protection circuitry. It sits between an HDMI transmitter and the HDMI > + connector, and provides control over the level shifter enable and the > + hot-plug detect signals. > + > +properties: > + compatible: > + oneOf: > + - const: ti,tpd12s015 > + - items: > + - const: ti,tpd12s016 > + - const: ti,tpd12s015 > + > + gpios: > + description: > + The CT CP HPD, LS OE and HPD GPIOs, in that order. The first GPIO > + controls the level shifter, the second enables the level shifter > + outputs and the third reads the hot-plug detect line. Boards that > + also route the DDC lines through the chip use five entries, with > + the SCL and SDA GPIOs appended. > + minItems: 3 > + maxItems: 5 > + > + ports: > + $ref: /schemas/graph.yaml#/properties/ports > + > + properties: > + port@0: > + $ref: /schemas/graph.yaml#/$defs/port-base > + unevaluatedProperties: false > + description: HDMI input from the transmitter. > + > + port@1: > + $ref: /schemas/graph.yaml#/$defs/port-base > + unevaluatedProperties: false > + description: HDMI output to the connector. > + > + required: > + - port@0 > + - port@1 > + > +required: > + - compatible > + - ports > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/gpio/gpio.h> > + > + encoder1 { > + compatible = "ti,tpd12s015"; > + > + gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>, /* 60, CT CP HPD */ > + <&gpio2 9 GPIO_ACTIVE_HIGH>, /* 41, LS OE */ > + <&gpio2 31 GPIO_ACTIVE_HIGH>; /* 63, HPD */ > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + > + tpd12s015_in: endpoint { > + remote-endpoint = <&hdmi_out>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + > + tpd12s015_out: endpoint { > + remote-endpoint = <&hdmi_connector_in>; > + }; > + }; > + }; > + }; > + > +... > -- Regards, Laurent Pinchart
