On Tue, Oct 20, 2026 at 04:12:53PM -0400, [email protected] wrote: > From: Frank Li <[email protected]> > > Add support for the Waiken WKS101WX001-WCT, an industrial-grade 10.1-inch > IPS TFT LCD panel with a capacitive touchscreen. > > Although the module advertises LVDS support, enabling LVDS operation > requires hardware modification, including the removal of several on-board > resistors. As there are currently no known users of the LVDS configuration, > only the default interface mode is supported. > > If LVDS support is needed in the future, a dedicated driver can be > introduced to handle switching between LVDS and LDB modes.
s/LDB/DPI/ ? > > Signed-off-by: Frank Li <[email protected]> > --- > change in v3 > - add wct surfix and change to use MEDIA_BUS_FMT_RGB888_1X24 > - Add information about lvds support plan. > > change in v2 > - update height to 135 from 136 (sashiko) > --- > drivers/gpu/drm/panel/panel-simple.c | 31 +++++++++++++++++++++++++++++++ > 1 file changed, 31 insertions(+) > > diff --git a/drivers/gpu/drm/panel/panel-simple.c > b/drivers/gpu/drm/panel/panel-simple.c > index d7dbd7442919b..f2a1668087de7 100644 > --- a/drivers/gpu/drm/panel/panel-simple.c > +++ b/drivers/gpu/drm/panel/panel-simple.c > @@ -5252,6 +5252,34 @@ static const struct panel_desc vl050_8048nt_c01 = { > .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE, > }; > > +static const struct drm_display_mode waiken_101wx001_mode = { To align with the compatible string: s/101wx001/101wx001_WCT/ > + .clock = 71100, > + .hdisplay = 1280, > + .hsync_start = 1280 + 70, > + .hsync_end = 1280 + 70 + 10, > + .htotal = 1280 + 70 + 10 + 80, > + .vdisplay = 800, > + .vsync_start = 800 + 10, > + .vsync_end = 800 + 10 + 3, > + .vtotal = 800 + 10 + 3 + 10, > + .width_mm = 217, > + .height_mm = 135, > + .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC, > +}; > + > +static const struct panel_desc waiken_101wx001_panel = { Ditto. -- Regards, Liu Ying
