On Mon, Oct 08, 2001 at 01:56:28AM +0200, Michel Dänzer wrote:
> On Sun, 2001-10-07 at 23:44, Dagfinn Ilmari Mannsåker wrote:
> 
> > I am very keen on getting DRI up and running on this machine, and I
> > will assist with any tests and/or troubleshooting you find necessary,
> > just give me the instructions.
> 
> Have you followed the DRI User Guide? There are quite a few things that
> can prevent direct rendering. Have you looked through the server log
> carefully?

Yes, I have followed the DRI User Guide (without knowing it. I read through
it, and I have done exactly as it said). From looking at the log, I can't see
what would cause direct rendering to fail. The parts of the log relevant to
the card are:

[ scanpci output: ]
(--) PCI:*(1:0:0) ATI Rage 128 Mobility LF rev 2, Mem @ 0xf4000000/26,
0xfdffc000/14, I/O @ 0xec00/8
[ snip ]
(--) Chipset ATI Rage 128 Mobility LF (AGP) found
[ snip ]
(II) R128(0): PCI bus 1 card 0 func 0
(**) R128(0): Depth 16, (--) framebuffer bpp 16
(II) R128(0): Pixel depth = 16 bits stored in 2 bytes (16 bpp pixmaps)
(==) R128(0): Default visual is TrueColor
(==) R128(0): RGB weight 565
(II) R128(0): Using 6 bits per RGB (8 bit DAC)
(II) R128(0): initializing int10
(II) R128(0): Primary V_BIOS segment is: 0xc000
(--) R128(0): Chipset: "ATI Rage 128 Mobility LF (AGP)" (ChipID = 0x4c46)
(--) R128(0): Linear framebuffer at 0xf4000000
(--) R128(0): MMIO registers at 0xfdffc000
(--) R128(0): VideoRAM: 8192 kByte (128-bit SDR SGRAM 1:1)
(**) R128(0): Using flat panel for display
(II) R128(0): Panel size: 1400x1050
(II) R128(0): Panel ID: Samsung LTN141P2
(II) R128(0): Panel Type: Color, Single, TFT
(II) R128(0): Panel Interface: LVDS
(II) R128(0): PLL parameters: rf=2700 rd=12 min=12500 max=25000; xclk=10500
(II) R128(0): VESA BIOS detected
(II) R128(0): VESA VBE DDC supported
(**) R128(0): Using gamma correction (0.7, 0.7, 0.7)
(II) R128(0): 14.1in TFT: Using hsync range of 31.50-80.00 kHz
(II) R128(0): 14.1in TFT: Using vrefresh range of 40.00-80.00 Hz
(II) R128(0): Clock range:  12.50 to 250.00 MHz
[ snip ]
(==) R128(0): Write-combining range (0xf4000000,0x800000)
(WW) R128(0): Static buffer allocation failed -- need at least 8663 kB video
memory
(II) R128(0): Memory manager initialized to (0,0) (1408,2978)
(II) R128(0): Reserved area from (0,1050) to (1408,1052)
(II) R128(0): Largest offscreen area available: 1408 x 1926
(==) R128(0): Backing store disabled
(==) R128(0): Silken mouse enabled
(II) R128(0): Using XFree86 Acceleration Architecture (XAA)
        Screen to screen bit blits
        Solid filled rectangles
        8x8 mono pattern filled rectangles
        Indirect CPU to Screen color expansion
        Solid Lines
        Dashed Lines
        Scanline Image Writes
        Offscreen Pixmaps
        Setting up tile and stipple cache:
                32 128x128 slots
                13 256x256 slots
                5 512x512 slots
(II) R128(0): Acceleration enabled
(II) R128(0): Using hardware cursor (scanline 2104)
(II) R128(0): Largest offscreen area available: 1408 x 1924
(II) R128(0): Direct rendering disabled

I have tried with 24bpp too, with the same result.
-- 
Dagfinn I. Mannsåker
GPG Public Key ID: 0x51ECFAC6
Fingerprint:  48BB A64D CE9B 9A06 65DF  395C D42E CDC4 51EC FAC6

Attachment: msg01835/pgp00000.pgp
Description: PGP signature

Reply via email to