On Sat, 18 May 2002, Felix Kühling wrote: > On Sat, 18 May 2002 11:30:28 -0400 (EDT) > Leif Delgass <[EMAIL PROTECTED]> wrote: > > > Did you have a 2D accelerated server running on another vt? The DDX saves > > and restores its register state on mode switches, so it could be a problem > > with the FIFO depth or pattern registers being changed. Try testing > > without another X server running if you haven't already. Also, does > > anything show up in the system log? > > I did have a 2D accelerated X-server running. But I started the DRI > server from a text console and didn't switch between the servers during > the tests, so it shouldn't matter. As to the syslog, my kern.log file is > actually the syslog. My distro configures syslog so that it sends all > syslog messages from the kernel to kern.log. In the other syslog files > there are no further messages.
Sorry, I was in a hurry before and didn't read your message very carefully. I think I've fixed the segfault, can you do a cvs update in xc/programs/Xserver/hw/xfree86/drivers/ati and then do a 'make install' in that directory. You should only need to rebuild the DDX. -- Leif Delgass http://www.retinalburn.net _______________________________________________________________ Hundreds of nodes, one monster rendering program. Now that's a super model! Visit http://clustering.foundries.sf.net/ _______________________________________________ Dri-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/dri-devel
